ProForm PFSB43140 user manual Symptom the Water Level Drops

Page 21

9.SYMPTOM: THE WATER LEVEL DROPS

a.A clamp or seal inside the pump compartment may be loose. Check inside the pump compart- ment for excess water and watch the pump unit while it is operating to see if water drips from any of the plumbing. If you can identify the location of the leak inside of the spa jet unit, tighten the clamp or replace the damaged seal.

b.Some water loss due to evaporation is normal. If rapid water loss occurs, or if you notice wet- ness on the floor around the hydrotherapy spa, the spa shell may have a leak. Contact your local pool and spa service provider for repairs.

10.SYMPTOM: THE SPA JET UNIT CONTINUES TO RUN AFTER IT HAS BEEN SHUT OFF

a.To turn off the main jets, press pump button 1 once or twice. Note: If the actual temperature of the water in the spa is below the set temper- ature, or if the spa is running a filter cycle, the heater pump/motor will not shut off.

11.SYMPTOM: THE CONSOLE DISPLAYS “--,” “OHH,” “ICE,” “SnA,” “SnB,” “SnS,” “HFL,” “LF,” “dr,” “OHS,” or “drY”

a.If the console displays one of the messages listed above, or if the console does not function correctly, please call our Customer Service Department toll-free at 1-888-884-6555, Monday through Friday, 8 a.m. until 5 p.m. Central Time (excluding holidays).

21

Image 21
Contents Customer HOT Line Model No. PFSB43140 Serial NoPosting the Warning Sign Table of ContentsRead and Follow ALL Instructions Important Safety InstructionsPage Page Before You Begin If you set up the hydrotherapy spa inside If you set up the hydrotherapy spa outsideChoosing a Location for the Hydrotherapy Spa Option Wiring the Hydrotherapy SpaAssembly Page Priming the Pumps Using the Hydrotherapy SpaTesting and Treating the Water Securing the SPA Cover on the SPAStarting the Hydrotherapy SPA Jet Layout Diagram Using the Controls Page Maintenance Maintaining the Proper PH Balance Water ChemistrySanitizing the Hydrotherapy SPA Changing the Filter CycleDraining the Hydrotherapy SPA Attaching and Removing the Access PanelsReplacing the LED Light Draining the PumpsWinter USE and Care Be turned on accidentallyTroubleshooting Symptom the Water Level Drops Part List-Model No. PFSB43140 Exploded Drawing-Model No. PFSB43140Key No. Qty Description Model No. PFSB43140 R0604A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT