Maintenance

The hydrotherapy spa is designed to provide you with years of enjoyment. Please follow the guidelines below to properly maintain your hydrotherapy spa.

MAINTENANCE SCHEDULE

DAILY

¥Check the water level and refill the spa to the level shown on page 9, step 5.

¥Check the pH balance and sanitizer level. Adjust if necessary (see WATER CHEMISTRY on page 17).

¥Clean the surface of the water with a skimming net.

WEEKLY

¥Clean the spa shell at the waterline.

¥Check and thoroughly clean the filter (see CHECK- ING AND CLEANING THE FILTER on this page).

¥Replace the filter if needed (see ORDERING REPLACEMENT PARTS on the back cover).

MONTHLY

¥Clean the spa cover (see MAINTAINING THE SPA COVER below).

¥Soak the filter for two hours in a trisodium phos- phate (TSP) solution. Rinse the filter in clean water.

¥Replace the filter if needed (see ORDERING REPLACEMENT PARTS on the back cover).

EVERY THREE MONTHS

¥Drain the spa and refill with clean water. Sanitize and test the pH of the water.

¥Check for any leaks around the pump or joints in the pipes. The seals will wear out over time; detect- ing leaks early can reduce repair costs.

¥Clean the interior of the spa. Do not use solvents or waxes.

EVERY SIX MONTHS

¥Treat the exterior with a wood sealant (see MAIN- TAINING THE SPA EXTERIOR below).

MAINTAINING THE SPA EXTERIOR

The wood panel exterior has been treated with a sealant at the factory to protect the wood from water damage. We suggest that you treat the wood finish twice a year with an additional coat of weather sealant. Contact your local spa and pool supplier for advice on which sealants work best in your climate.

CLEANING THE SPA SHELL

The spa shell should be cleaned with a mild soap solution. Do not use solvents. The spa should always be clean and dry before being moved or stored.

MAINTAINING THE SPA COVER

The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner on the entire cover. Rinse the cover with a garden hose to remove any cleaner residue. Dry the cover entirely. You should also use a non-silicone based vinyl conditioner on the cover after you clean it. This will help protect the cover from sun damage.

CHECKING AND CLEANING THE FILTER

The filter should be checked periodically for build-up of dirt and oil. If the filter needs to be cleaned, follow the steps below:

1.Turn off the power.

2.Unscrew the filter from the filter housing in the spa shell and remove it from the spa.

3.Check the filter for any dirt or debris. If the filter needs to be cleaned, rinse the filter with a hose. If the filter still is dirty, you will need to soak it in a cleaning solution which can be obtained from a pool and spa supply store.

4.Inspect the filter for damage. Replace the filter if there are any signs of damage.

5.Re-insert the threaded end of the cleaned filter into the filter housing. Screw the filter into place.

REPLACING THE LIGHT BULB

If the light in the spa shell burns out, you will need to remove the access cover to replace it (see ATTACH- ING AND REMOVING THE ACCESS COVER on page 17).

Locate the light housing. Turn the housing counter- clockwise and remove it from the spa shell.

Light Housing	Light
	Light
	Bulb

Light

Housing

To replace the light bulb, pull the old bulb out of the housing and insert a new light bulb. Re-attach the light housing to the spa shell. Re-attach the access cover to the spa unit.

831.21005 specifications

The ProForm 831.21005 is an advanced treadmill designed for home fitness enthusiasts seeking an effective and convenient way to achieve their health goals. This model combines innovative technology with user-friendly features, making it an excellent addition to any home gym setup.

One of the standout features of the ProForm 831.21005 is its robust motor. With a powerful 2.75 HP motor, this treadmill delivers a smooth and consistent performance, supporting users through various workout intensities. The motor is designed to handle high speeds, allowing for a top speed of 10 MPH. This versatility accommodates both walking and running workouts, catering to a wide range of fitness levels.

Another key characteristic of the ProForm 831.21005 is its adjustable incline functionality. Users can simulate outdoor running conditions by adjusting the incline to different levels, enhancing calorie burn and engaging various muscle groups. This feature not only adds variety to workouts but also allows for a more challenging experience.

The treadmill boasts a spacious running surface, measuring 18 inches in width and 55 inches in length. This ample space grants users freedom of movement, thereby making workouts more comfortable and enjoyable. The ProForm 831.21005 is also equipped with ProForm's ComfortTech cushioning system, which reduces impact on joints and provides a more comfortable run, minimizing the risk of injury during long sessions.

In terms of technology, the ProForm 831.21005 is designed with an easy-to-read LCD display that tracks essential workout metrics, including speed, time, distance, and calories burned. Additionally, it features built-in workout programs that allow users to explore different routines, encouraging goal achievement and promoting weight loss.

Moreover, the treadmill is compatible with iFit technology, providing access to a library of interactive workouts led by professional trainers. With iFit, users can explore new terrains and participate in global workouts, making home exercise more engaging and dynamic.

Durability is another noteworthy attribute of the ProForm 831.21005. Its sturdy frame is designed to withstand regular use, ensuring longevity and reliability. The portable design allows for easy storage, making it a practical choice for those with limited space.

In conclusion, the ProForm 831.21005 is a feature-rich treadmill that combines performance, technology, and user comfort. Its powerful motor, adjustable incline, cushioning system, and compatibility with iFit technology make it a strong contender for anyone serious about improving their fitness from home.