ProForm 831.21005 user manual SET-UP and Assembly

Page 8

SET-UP AND ASSEMBLY

Before beginning assembly, carefully read the following information and instructions:

¥Place all parts in a cleared area and remove the packing materials from the spa shell; do not dis- pose of the packing materials until assembly is completed and the spa is in operation.

¥Assembly requires two people.

¥During assembly, make sure that all parts are ori- ented as shown in the drawings.

¥Read each assembly step before you begin.

¥Tighten all parts as you assemble them, unless instructed to do otherwise.

ASSEMBLY REQUIRES THE FOLLOWING TOOLS (not included):

¥One (1) phillips screwdriver

¥You may also need some soap or wax.

1.Before beginning assembly, be sure that you have read and understand the information on the previous two pages.

Remove the four access cover screws from the access cover. Remove the access cover from the Spa Unit (15) by sliding the access cover down and pulling the bottom of access cover away from the Spa Unit. Be careful not to damage the spa shell.

2.Locate and check the position of the cut-off valves. Occasionally the valves will be closed at the factory during manufacturing. The cut-off valves must be open for proper spa operation. To open the valves, hold one of the handles and turn the handle until you can pull it out to the open position. Open the other valve in the same manner. WARNING: THE

MOTOR WILL BE DAMAGED IF IT IS OPERATED WITH THE CUT-OFF VALVES CLOSED.

Close the valve knob on the drain hose. Thread the cap onto the drain hose. Thread the drain plug into the Pump Motor (13). Tighten the pump fittings.

1

 

 

 

 

Spa

 

 

 

Shell

 

15

 

 

 

 

Access

Access Cover

 

Cover

 

 

Screws

 

 

 

2

 

 

Cut-off Valve

 

 

 

Cut-off

 

 

Valve

 

 

 

 

 

13

 

 

 

Drain Hose

Cap

Valve

Drain

Pump

Knob

Plug

Fittings

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL QUESTIONS?Customer HOT Line Table of Contents Limited ONE Year Massage SPA WarrantyPage Page Page Before YOU Begin If you set up the hydrotherapy spa inside Choosing a Location for the Hydrotherapy SPASET-UP and Assembly Page Wiring the Restoration Access Cover Using the Hydrotherapy SPA Testing and Treating the WaterStarting the Hydrotherapy SPA Securing the SPA CoverSPA Shell Diagram SPA Operation Console Diagram Using the Console Adjusting the Filter Cycle Posting the Warning SignMaintenance Attaching and Removing the Access Cover Sanitizing the Hydrotherapy SPAWater Chemistry Maintaining the Proper PH BalanceDraining the Pump Opening and Closing the CUT-OFF ValvesWinter USE and Care TROUBLE-SHOOTING Symptom the SPA Continues to RUN After IT has Been Shut OFF Part LISTÑModel No Exploded DRAWINGÑModel No Ordering Replacement Parts

831.21005 specifications

The ProForm 831.21005 is an advanced treadmill designed for home fitness enthusiasts seeking an effective and convenient way to achieve their health goals. This model combines innovative technology with user-friendly features, making it an excellent addition to any home gym setup.

One of the standout features of the ProForm 831.21005 is its robust motor. With a powerful 2.75 HP motor, this treadmill delivers a smooth and consistent performance, supporting users through various workout intensities. The motor is designed to handle high speeds, allowing for a top speed of 10 MPH. This versatility accommodates both walking and running workouts, catering to a wide range of fitness levels.

Another key characteristic of the ProForm 831.21005 is its adjustable incline functionality. Users can simulate outdoor running conditions by adjusting the incline to different levels, enhancing calorie burn and engaging various muscle groups. This feature not only adds variety to workouts but also allows for a more challenging experience.

The treadmill boasts a spacious running surface, measuring 18 inches in width and 55 inches in length. This ample space grants users freedom of movement, thereby making workouts more comfortable and enjoyable. The ProForm 831.21005 is also equipped with ProForm's ComfortTech cushioning system, which reduces impact on joints and provides a more comfortable run, minimizing the risk of injury during long sessions.

In terms of technology, the ProForm 831.21005 is designed with an easy-to-read LCD display that tracks essential workout metrics, including speed, time, distance, and calories burned. Additionally, it features built-in workout programs that allow users to explore different routines, encouraging goal achievement and promoting weight loss.

Moreover, the treadmill is compatible with iFit technology, providing access to a library of interactive workouts led by professional trainers. With iFit, users can explore new terrains and participate in global workouts, making home exercise more engaging and dynamic.

Durability is another noteworthy attribute of the ProForm 831.21005. Its sturdy frame is designed to withstand regular use, ensuring longevity and reliability. The portable design allows for easy storage, making it a practical choice for those with limited space.

In conclusion, the ProForm 831.21005 is a feature-rich treadmill that combines performance, technology, and user comfort. Its powerful motor, adjustable incline, cushioning system, and compatibility with iFit technology make it a strong contender for anyone serious about improving their fitness from home.
Top Page Image Contents