ADDITIONAL SAFETY RULES FOR CHARGER
1.The Makita charger Model DC240 is specifically designed t o charge only the Makita batteries used in Model UM401D. Do not attempt t o charge any other battery with this charger.
2.Handle the charger carefully. Do not drop or strike it.
3.Never carry the charger by cord or yank it t o disconnect from receptacle.
4.Keep cord from heat, oil, chemicals, and sharp edges.
5.Use only a power source of the same voltage as indicated on the nameplate of the charger when charging.
6.Do not attempt t o use a
7.Charge mower at a room temperature between 5 O C ( 4 1 O F) and 40° C ( 1 0 4 O F).
8.Do not charge in place exposed t o direct sunlight.
9.Do not charge lawn mower in rain, or in wet locations.
10.Do not allow the charger t o get wet.
11 . Do not charge inside a box or container of any kind.
12.Do not charge near volatile, flammable material such as gasoline, paint, gas, adhesive, etc.
13.Do not charge on top of paper, carpet, vinyl sheeting, cloth materials, etc.
14.Do not allow anything t o cover or clog the charger vents. Do not attempt t o insert anything into the vents.
15.Do not touch the charger with wet hands.
16.Do not charge in dusty place.
17.Stop charging immediately ifyou notice anything abnormal. Ship or take the charger and the mower t o your nearest Makita Service Center or Distributor for checking them.
18.Do not attempt t o disassemble or make modifications t o the charger.
19.Do not put any metal object or foreign matter into the charging plug. Short- circuit will occur, causing a burn injury and charger breakdown.
20.This charger incorporates parts such as switches and relays that are likely t o produce arcs or sparks; therefore, when charging mower in a garage or similar location, locate the charger in a room or enclosure provided for this purpose.
SAVE THESE INSTRUCTIONS.
7