Unpacking
Your mower has been completely assembled at the factory except for the rear bag.
1.Remove the rear bag, instruction manual, charger and plastic bag containing acces- sories from the carton.
2.Remove the mower from the carton and place all four wheels on the ground or,floor.
3.Check the carton thoroughly and make sure there are no loose parts.
4.To unfold the handle, raise it into place. Fit the protrusion of the handle into one of the square holes in left and right sides of the mower, and then secure the handle by tightening the clamp nuts.
Clamp nut | / |
Charging |
|
|
*Remove the key from the mower (slide it | Inlet cover |
|
to your left and pull out) and store it in a | Key II | inlet |
safe place - out of the reach of children. |
|
|
*Open the inlet cover and insert the charg- |
|
|
ing plug into the inlet. (REMEMBER: The |
|
|
charging inlet has polarity. DO NOT DAM- |
|
|
AGE OR ABUSE THE PLUG AND INLET.) |
|
|
*Then plug the charger into the power source. The charging light will turn on in green color, and immediately the color of the charging light will change to red and charging will begin. The charging light will remain lit steadily during charging.
*When the charging light color changes
from red to green, <he charging is complete. Charging takes approx. 4 hours
*After charging, unplug the charger from the power source and pull out the charging plug from the charging inlet.
8