Assembly Instructions

CAUTION : Before performing any work on the blower, always switch off the motor and pull the spark plug connectors off the spark plug.

Always wear protective gloves!

CAUTION : Start the blower only after having assembled it completely.

1.ASSEMBLY OF BLOWER PIPES

1)Align grooves in the blower pipe with pegs on the blower housing and slide the pipe onto housing.

2)Turn the blower pipe clockwise to lock it into place.

2.ASSEMBLYOF VACUUMATTACHMENT

1)Installing Vacuum pipe (nozzle)

(1)Loosen the screw ① and open the protector ② .

WARNING!

When using this machine as a blower, be sure to confirm that the screw ① is not loosened at each time of startup. If the screw is loosened, retighten it.

It is dangerous to operate the machine with the screw ① loosened. The operator’s finger or clothing may be caught in the impeller, which will result in a serious accident.

(2)	Align the	indicated on the vacuum pipe with the “ ● “
	indicated on the blower. Then insert the vacuum pipe into the
	blower.
(3)	Turn the vacuum pipe until the		is aligned with the “ ▼ “
	indicated on the blower to lock the vacuum pipe.

WARNING!

Always hold the mounting end of the vacuum pipe when attaching/ detaching the vacuum pipe.

2)Installing Elbow and Dust Bag

(1)Open the fastener of the dust bag.

(2)Insert the elbow into the dust bag and take it out through the bag’s entry.

(3)Install the elbow on the blower.

WARNING!

Do not attempt to pick up large wood chips, metals, glass, stones, liquids, lighted cigarettes, fire works or

the like.

Always mount the protector/vacuum pipe in the right way before operation. Operation without the protector/vacuum pipe is dangerous, the impeller may catch the operator’s fingers or clothes and it can result in serious injury.

①Screw

②Protector