10.1 13.0 13.1 | Makita 5016N8 manual

Use Of Extension Cord

If the extension cord is intended t o be used outdoors, the cord shall be marked with the suffix W - A following the cord type designation, for example - SJTW- A, t o indicate it is acceptable for outdoor use. Use an extension cord heavy enough t o carry the current the tool will draw. Undersize cord will cause a drop in line voltage resulting in loss of power and over-heating. Make sure the exten- sion cord is in good condition before using. Keep the cord away from the cut- ting area and t o position cord so that it will not be caught on branches, and the like, during cutting. Use the table below t o determine the proper wire size re- quired in the extension cord.

Ampere rating			10.1 - 13.0 13.1 - 15.0
(on nameplate) 0 - 5.0		5.1 - 10.0	10.1 - 13.0 13.1 - 15.0
(on nameplate) 0 - 5.0		5.1 - 10.0
Ext. Cord Length		Wire Size (American Wire Gauge)
25 Ft.	18	18	16		14
50 Ft.	18	16	16		14
75 Ft.	18	16	14		14
100 Ft.	16	14	12		12
125 Ft.	16	12	12		12
150 Ft.	16	12	12		-
			~	~	~

Contact Makita Authorized or Factory Service Center if a proper extension cord cannot be found.

SAVE THESE INSTRUCTIONS.

Makita 5016N8 specifications 10.1 13.0 13.1

10.1 - 13.0 13.1 - 15.0