Sears 247.77055 Attaching The Hose Assembly, Attaching the BAG, Attaching the Blower Chute

Page 7

•Secure the two handles by tightening the upper wing nuts (carriage bolts must be seated properly into the handle).

•Remove the hairpin clips from the handle brackets and remove the carriage bolts and wing nuts from the lower handle. See Figure 3.

•Place the bottom holes in lower handle over the pins on handle brackets and secure with hairpin clips.

•Insert carriage bolts through upper hole in lower handle from the outside and secure with wing nuts.

Wing Nuts

Carriage Bolt

Hairpin Clip

Figure 3

•Loosen the wing nut that secures the rope guide to the right side of upper handle.

•Pull the starter rope out of the engine slowly and slip the starter rope into the rope guide. Tighten the wing nut.

Attaching The Hose Assembly

•Slide hose adapter of hose assembly into the base adapter located on the left front of the Yard Vacuum. See Figure 4.

•Pull spring loaded pin out on the base and align pin with the first hole in the hose adapter.

•Release the pin to lock the hose in place.

•Connect the hose handle near nozzle end of hose to the handle bracket on the upper handle. Refer to Figure 7.

Hose

Adapter

Spring

Loaded Pin

Figure 4

•Snap hose handle into the nozzle handle clip on the lower handle to secure in place and lay hose tubing on side hanger bracket next to chipper chute. Refer to Figure 7.

ATTACHING THE BAG

Bag Handle

Stud

Straps

Front Tab

Locking Rod

Stud

Figure 5

•Grasp bag handle with one hand and slide locking rod on mounting bracket with other hand toward engine. Use the end of mounting bracket as leverage when sliding the locking rod.

See Figure 5.

•Slip bag over the rim of the discharge opening and release locking rod to secure bag in place.

•Snap bag clip to the top of the lower handle.

•Place the lower straps on the bag over the top of lower handle, hooking them on the studs.

NOTE: The bag/chute switch button attached to the mounting bracket must be fully depressed by the tip of front tab on bag handle when securing the bag or engine will not start.

ATTACHING THE BLOWER CHUTE

NOTE: The bag must be removed before installing the blower chute.

•Grasp blower chute with one hand and slide locking rod on mounting bracket with other hand toward engine. Use the end of mounting bracket as leverage when sliding the locking rod.

See Figure 6.

•Slip blower chute over rim of discharge opening and release locking rod to secure chute in place.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Yard Vacuum Warranty Table of ContentsTraining SafetyPreparation Operation Maintenance and StorageRepair Protection Agreement Loose Parts in Carton See Figure Disconnecting Spark PlugAssembly Removing Unit from CartonAttaching the BAG Attaching The Hose AssemblyAttaching the Blower Chute Front Tab Locking Rod Bag Nozzle Height Adjustment LeverChipper Chute NozzleTo Stop Engine GAS and OIL FILL-UPTo Start Engine To Empty BAG Using the Nozzle VacuumTo Remove Blower Chute Nozzle Height Adjustment Using the Hose AssemblyLubrication Clean EquipmentGeneral Recommendations Check Engine OILClean Engine Service AIR CleanerService Spark Plug Service MufflerRemoving the Flail Screen Carburetor AdjustmentService and Adjustments Engine SpeedSharpening or Replacing Chipper Blade Disconnect and ground the spark plug wireStorage Yard VacuumEngine OtherProblem Possible Causes Corrective Action TroubleshootingParts List Part Description Sears Craftsman 6.0 H.P. Yard Vacuum Model 731-2294A Nozzle Door Garantia ContenidoSeguridad Operacion EN GeneralServicio NiñosInstalacion DEL Manillar DesembalajePiezas Sueltas Desconexion DE LA BujiaInstalacion DEL Tubo DE Soplado Tolva de Operacion Controles DE OperacionPara Apagar EL Motor GasolinaDescarga de la bolsa Para Arrancar EL MotorExtracción del canal de soplado Uso del montaje de la manguera Uso del pico de la aspiradoraAjuste de la altura del pico Revision DEL Aceite DEL Motor Recomendaciones GeneralesLubricacion Limpieza DEL EquipoServicio DEL Silenciador Para Vaciar EL AceiteServicio DEL Filtro DE Aire Servicio DE LA BujiaServicio Y Ajustes Ajuste DEL CarburadorVelocidad DEL Motor Retiro DE LA Rejilla DE FlagelosAfilado O Reemplazo DE LA Cuchilla Astilladora Almacenamiento Aspiradora para jardinesMotor OtrosLocalizacion DE Averias Problema Causas posibles SoluciónRepair Protection Agreements Get it fixed, at your home or ours

247.77055 specifications

Sears 247.77055 is a robust tool that combines a variety of features and technologies to meet the needs of both amateur and professional users. As part of Sears' commitment to quality and durability, this particular model is designed to provide reliable performance while ensuring ease of use.

One of the main characteristics of Sears 247.77055 is its powerful motor. The high-performance motor delivers consistent power across all tasks, whether cutting, drilling, or performing intricate jobs. It ensures that the tool can handle heavy-duty applications without straining or overheating, making it ideal for long-term use in demanding environments.

In addition to its robust motor, the Sears 247.77055 incorporates advanced safety features. These include an integrated safety switch that prevents accidental starts, as well as protective guards that shield users from debris and injury. Ergonomic design is a cornerstone of this model, ensuring that the grip is comfortable and minimizes fatigue during prolonged usage.

The tool also stands out for its versatility. It comes with multiple attachments and accessories, allowing users to switch between different tasks seamlessly. From sanding and grinding to polishing and drilling, the Sears 247.77055 can tackle a vast array of projects, enhancing its value for both DIY enthusiasts and professionals.

Another important feature of the Sears 247.77055 is its compact and lightweight design. This feature makes it easy to store and transport, providing convenience for users who may need to take their tools to job sites or move them around within their workspace. The tool’s streamlined construction does not compromise on power, ensuring that the tool remains effective without being cumbersome.

Sears has also integrated state-of-the-art technologies into the 247.77055. For instance, the tool incorporates advanced cooling systems that prevent overheating during extended use, maintaining performance and extending its lifespan. Additionally, features such as variable speed settings allow users to control the power output based on the specific requirements of the task at hand.

Moreover, the Sears 247.77055 is backed by a warranty, reflecting the company’s confidence in the product's durability and reliability. Overall, the combination of performance, safety, versatility, and user-friendly design makes the Sears 247.77055 a valuable addition to any toolkit, suited for both home improvement projects and professional applications alike.
Top Page Image Contents