Regular Maintenance
LUBRICATION
Lubricate the unit at the locations shown in Figures 16 through 22 as well as the following lubrication points.
Grease:
•front caster wheel axles
•motion control pivots
•suspension
•rear deck mounts
•deck lift pivots
•deck lift foot pedal
•front pivot frame
•mower arbors
Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.
Not all greases are compatible. Ferris Red Grease is recommended,
Oil:
•gauge wheel brackets
•roller cross shaft
•roller location links
•discharge chute hinge
Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.
Figure 16. Mower Arbor Lubrication
Figure 17. Mower Lubrication (Grease) |
Figure 18. Mower Lubrication (Oil)
18