Intel ReValver MK III manual Connecting the Guitar to the sound card

Page 5

4

Connecting the Guitar to the sound card

Here are three ways to connect your Guitar to the computer:

1)The simplest option is to hook it up to the sound card Line-In jack using a suitable connector, usu­ally a 1/4” to 1/8” adapter. The advantage is that you don’t have to buy any additional gear (except maybe the cable adapter) but the sound is not ideal, probably not even good. The reason for the dull and boring sound is due to an impedance mismatch.

The sound card input is designed to accept input from electrical devices which have adequate driving signal; a Guitar does not have enough signal. The input impedance of a sound card is in the order of a few thousand ohms (kOhm), while ideally, you want it to be around a mil­lion ohms (1 meg ohm).

2)Another option is to use a Direct (D.I.) box or Preamp. DI stands for Direct Input or Direct Interface. It is an electrically powered box that can be used to match the input impedance of the sound card and the output impedance of the Guitar. The simplest DI box could cost around $20, but there are boxes that could easily cost $200 if you want all the “extras,” too. A DI box has a Hi-Z input, (“Z” is the unit of Impedance; High Impedance input, in other words). To record, you just plug the DI box directly into the computer Line-In jack.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Doc revision Table of contents Mac Compatibility issuesLoading the VST or AU plug-in into the DAW Recording the GuitarConnecting the Guitar to the sound card Page Word about latency Recording the Guitar with or without effects? Using 16 bit or 24 bit sampling?Using 44.1/48kHz, 96kHz or higher? Title module Presets and banksSelecting modules Quality modesMoving modules Toggling between mono and stereoComplete amps ModulesPage Page Module name = Basic Page Page Preamplifiers Page Page Module name = Peavey ValveKing power amp Power amplifiersPage Page Stomp boxes / pedals Page Module name = The Sher’ff Page Page Speakers / cabinets General effects Page Page Page Miscellaneous utilities Page Page Tweaking modules Page Page Tube Tweak GUI Page Page Plug-in automation Midi control and automationPlug-in automation parameters How much does the sound of the Guitar matter? Finding a great sound FAQWhat about the presence controls? Are the amps in ReValver MK III modeled after real amps?Copyrights Licensing and copy protection

ReValver MK III specifications

The Intel ReValver MK III is an advanced modeling guitar amplifier software that has captivated musicians since its inception. With a blend of cutting-edge technology and an intuitive interface, it allows guitarists to create an endless range of tones, capturing the essence of classic and modern amplifiers with precision and fidelity.

One of the key features of the ReValver MK III is its extensive library of amplifier models. Users have access to a wide variety of iconic amplifiers from different eras, each modeled with meticulous attention to detail. This includes everything from vintage tube amps to high-gain modern monsters, providing musicians with a versatile toolkit for crafting their unique sound.

The technology behind ReValver MK III is revolutionary, utilizing a proprietary modeling technique known as "Instrument Modeling Technology." This approach captures not only the sound of the amplifiers but also the way they interact with different environments and speaker configurations. Musicians can select various cabinet simulations and microphones, allowing for realistic recording setups right from their computers. This feature is essential for guitarists wanting to achieve studio-quality tones without the need for physical gear.

Another standout characteristic is the pedalboard feature. ReValver MK III includes a comprehensive selection of effects pedals, allowing users to chain together distortion, delay, reverb, and more. This enables guitarists to replicate their favorite sounds from famous recordings or experiment with new ones. The flexibility to customize effects and order within the chain means that players can take full control over their sonic palette.

The user interface of ReValver MK III is designed to be both powerful and user-friendly. It offers a visual representation of the signal chain, making it easy to drag and drop components, tweak settings, and instantly hear the results. Additionally, the software supports various input methods, including MIDI controllers, ensuring that players can interact with the software in a way that suits their playing style.

ReValver MK III also stands out for its advanced performance capabilities. With low latency processing and high-quality audio output, it seamlessly integrates into both live performance and studio recording setups. The software is compatible with various digital audio workstations, making it a flexible choice for musicians.

In conclusion, the Intel ReValver MK III is a groundbreaking software solution that merges sophisticated modeling technology with practical user features. Its extensive range of amplifiers and effects, combined with a flexible interface and performance capabilities, make it an indispensable tool for guitarists seeking to expand their sound without the burden of traditional equipment. Whether you’re a seasoned professional or an aspiring musician, ReValver MK III promises to elevate your guitar playing experience.
Top Page Image Contents