3.3 CONNECTING WITH A MULTIPLEXER
TO LAN CAMERA VIDEO OUT BNC CONNECTOR
LAN CAMERA 1
LAN CAMERA 2
LAN CAMERA 16
3.4 UPDATING SYSTEM SOFTWARE
If the system software of the LAN CAMERA needs to be upgraded, please take the following
steps to safely process it.
Important: Before carrying out the following procedures, please ensure the SD card is
working and the file of the system firmware is intact
1.Format an SD card using the FAT16 format if it is unformatted; there are no limitations to an SD card’s capacity.
2.Create a directory named LANCAM in the SD card if it does not exist.
3.Copy the file of UPDATE.BIN to the
4.If the LANCAM is running, please power it off first.
5.Insert the SD CARD into the LANCAM.
6.Remove the Ethernet cable from the
7.In 5 to 10 seconds, a message reading "UPDATE PROCESSING" will show up on the screen on a blue background; if not, please check out steps 1 to 6 carefully or else inform your technical support while ignoring the following steps.
8.DO NOT power off the LANCAM while this update process is running until the message "UPDATE OK RESET PLEASE" appears on the screen; it might take 15 to 30 seconds to appear.
13
