3. INSTALLATION
Please follow the instructions and the diagram below to set up the system.
NOTE: The LAN CAMERA is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the LAN CAMERA factory default Static IP address(192.168.1.168). But the LAN CAMERA Static IP address can only appear if there is a connection between the LAN CAMERA and another device. If there is no such connection, the LAN CAMERA factory default Static IP address will not appear on the monitor screen.
3.1 CONNECTING WITH AN NVR
Use a crossover LAN cable to connect directly to an NVR.
LAN CAMERA
CONNECT TO ETHERNET
RJ45 CONNECTOR
CONNECT TO NVR
ETHERNET PORT
VIDEOAUDIO
ETHERNET
10/100
OUT OUT
SD Card
ALARM I/O
DC12V
3.2 CONNECTING WITH A DVR
CONNECT TO VIDEO OUT | LAN CAMERA |
BNC CONNECTOR |
|
|
|
CONNECT TO DVR
VIDEO IN
FROM MUX |
|
VIDEO MAIN MONITOR |
|
| AUDIO |
IN | IN |
ETHERNET
10/100
OUT
OUT |
|
TO | TO |
MUX'S VCR IN | MONITOR |
SD Card
ALARM I/O
DC12V
12