Huawei WDR814IG, WDR814G user manual Wireless Setup

Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual 3 Internet Access

The Static Routing feature allows PCs that are connected to the Wireless Security Router, either directly or through a hub/switch (in the immediate LAN), to communicate with other PCs in the respective LAN segment which are connected to the Wireless Security Router through another router (destination LAN). Up to 20 route entries may be input into the Wireless Security Router. The diagram below gives an example of the physical connections required to use Static Routing.

In the above diagram, PC2 in LAN#2 is connected to the Wireless Security Router via another router while PC1 in LAN#1 is connected to the Wireless Security Router directly. Without configuring the Static Routing function, the two PCs would not be able to communicate with each other.

3.6 Wireless Setup

Wireless The ADSL Wireless Router can reach the connection speed Network of 54Mbps over the 802.11g wireless standard. Also it

Mode: implements 802.11b for users using early version of wireless. If you have Wireless-G and 802.11b devices in your network, then keep the default setting, Mixed. If you have only Wireless-G devices, select G-Only. If you want to disable wireless networking, select Disable. If you would like to limit your network to only 802.11b devices, then select B-Only.

SSID: As the acronym for Basic Service Set Identifier, BSSID is the unique name shared among all clients and Wireless Broadband Router in the same wireless network. The BSSID must be identical for all points and must not exceed 32 characters.

34