Huawei WDR814G, WDR814IG user manual Trigger, Enable Check to make this trigger setting active

Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual			4 Advanced Applications
	Enable	Check to make this trigger setting active.

For detailed port information of your desired applications, please refer to the internet resources.

3.10.3 Trigger

Some applications use multiple TCP/UDP ports to transmit data. Due to the NAT, these applications cannot work with the Wireless Security Router. Port Triggering allows some of these applications to work properly. Note that only one PC can use each Port Triggering setting at any time.

Application Enter the name of application you wish to configure in the

Name column to identify this setting.

Triggered Enter the port number or range numbers the application Port Range uses when it sends packets outbound. The Triggered Port

acts as the trigger. When the Wireless Security Router detects the outgoing packets with these port numbers, it will allow the inbound packets with the Forwarded Port Numbers that you set in the next column to pass through the Wireless Security Router.

Forwarded Enter the port number or range numbers the inbound

Port Range: packets carry.

Enable Check to make this trigger setting active.

The following is a list of port numbers used on some popular applications:

Application	Outgoing Control	Incoming Data
Battle.net	6112	6112
DialPad	7175	51200, 51201,51210
ICU II	2019	2000-2038, 2050-2051
		2069, 2085,3010-3030
MSN Gaming Zone	47624	2300-2400, 28800-29000
PC to Phone	12053	12120,12122, 24150-24220
Quick Time4	554	6970-6999

43