2 – Part names and functions
Rear panel
c ~ IN
Use the supplied power cord to connect the amp
c to an AC power outlet. Confirm that the voltage matches that marked on the rear panel of your
CD Trainer LCD
vbn m | , . |
| MENU |
/! @ | # $ |
vPLAY indicator
Appears during playback.
bPAUSE indicator
Appears when playback is paused.
nREMAIN indicator
When no track number appears, this indicates that the remaining time of the entire CD is being shown on the time display. When the track number also appears, this indicates that the remaining time of the currently playing track is being shown. (See “Changing the time display mode” on page 16.)
mTUNER indicator
Appears when the tuner is in use. (See “Using the tuner” on page 18.)
,SET UP/MENU indicator
Blinks when the Setup menu is active. (See “Changing settings” on page 19.)
NOTE
US models show the indicator MENU in this position while European models show the indicator SETUP. The function is the same.
.Tuning meter
Shows pitch during tuning. The center is the correct pitch. The more the indicator lights to the left, the flatter the pitch and the more it lights to the right the sharper the pitch.
/LOOP indicator
Appears when set to loop playback (ALL/SGL). (See “Repeat playback of a selected loop” on page 16.)
!1
Appears when set to single (SGL) repeat playback.
@
Blinks when the loop repeat IN point is set and lights when the OUT point is set.
#Track number/time display
Shows the currently selected track number (above TRACK) and time during playback in minutes (M) and seconds (S). Also provides information when making various settings.
$
, 
Shows pitch when key adjustment is ON.
NOTE
Some models show these symbols as white on a black background. The function is the same.
TASCAM