Change the following
•Playback mode selection
•Tuner mode selection
•Tuner speaker output ON and OFF
•Initialize effect bank settings
8 – Changing settings
Press TUNER/SETUP again to cycle through the setting items. Use the DOWN and UP keys to adjust the values for each item and the CENTER key to restore the default setting.
Press TIME/ESC to finish making settings and close the SETUP (MENU) screen.
These settings are saved automatically.
Playback mode selection
Use the PLAY item to select whether all tracks on a disc (ALL) are played or only the currently selected track (SGL) is played when using the loop playback function. The default setting is ALL.
Tuner settings
Use the TMOD item to set the tuner mode. (See “Using the tuner” on page 18.)
CHR: chromatic mode (default setting)
GTR: guitar mode
Tuner speaker output
Use the TOUT item to set whether or not the guitar signal outputs through the center speaker when the tuner is turned on. The default setting is OFF.
Initializing effect banks
Use the FXRS item to restore all effect banks to their factory settings.
NO appears on the LCD when you choose the FXRS item. Press the DOWN or UP key and YES will appear. Press and hold the CENTER key to restore all effect banks to their factory settings.
After initialization is complete, DONE appears on the LCD and the time display reappears.
CAUTION
Initializing effect banks erases all the preset bank settings that have been made. Use this function only if you are sure that you want to overwrite these settings with the factory defaults.
TASCAM