Simplicity 1693264 manual Temporary Storage 30 Days or Less, Long Term Storage Longer than 30 Days

Page 20

Storage

AWARNING

Never store the tractor, with gasoline in engine or fuel tank, in a heated shelter or in enclosed, poorly ventilated enclosures. Gasoline fumes may reach an open flame, spark or pilot light (such as a furnace, water heater, clothes dryer, etc.) and cause an explosion.

Handle gasoline carefully. It is highly flammable and careless use could result in serious fire damage to your person or property.

Drain fuel into an approved container outdoors away from open flame or sparks.

TEMPORARY STORAGE (30 DAYS OR LESS)

Remember, the fuel tank will still contain some gasoline, so never store the tractor indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the tractor in any struc- ture used for human or animal habitation.

Here is a checklist of things to do when storing your tractor temporarily or in between uses:

Keep the tractor in an area away from where children

may come into contact with it. If there’s any chance of unauthorized use, remove the spark plug (s) and put in a safe place. Be sure the spark plug opening is protect- ed from foreign objects with a suitable cover.

If the tractor can’t be stored on a reasonable level sur- face, chock the wheels.

Clean all grass and dirt from the mower.

NOTE: lf storing your tractor between winter snow removal jobs in a co/d area, we suggest that you fill the fuel tank at the completion of each job to prevent water condensation in the fuel tank. Wait for engine to cool before filing tank.

LONG TERM STORAGE (LONGER THAN 30 DAYS)

Before you store your tractor for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

1.Drain crankcase oil while engine is hot and refill with a grade of oil that will be required when tractor is used again.

2.Prepare the mower deck for storage as follows:

a.Remove mower deck from the tractor.

b.Clean underside of mower deck. 1.

c. Coat all bare metal surfaces with paint.or light coat of oil to prevent rusting.

3.Clean external surfaces and engine.

4.Prepare engine for storage. See engine owner’s manual.

5.Clean any dirt or grass from cylinder head cooling fins, engine housing and air cleaner element.

6. Cover air cleaner and exhaust outlet tightly with plastic or Other waterproot material to keep out moisture, dirt and insects.

7.Completely grease and oil tractor as outlined in the Normal Care section.

8.Clean up tractor and apply paint or rust preventative to any areas where paint is chipped or damaged.

9.Be sure the battery is filled to the proper level with water and is fully charged. Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If battery is left in tractor, discon- nect the negative cable.

10.Drain fuel system completely or add a gasoline stabilizer to the fuel system. If you have chosen to use a fuel sta- bilizer and have not drained the fuel system, follow all safety instructions and storage precautions in this man- ual to prevent the possibility of fire from the ignition of gasoline fumes. Remember, gasoline fumes can travel to distant sources of ignition and ignite, causing risk of explosion and fire.

NOTE: Gasoline, if permitted to stand unused for extended periods (30 days or more), may develop gummy deposits which can adversely affect the engine carburetor and cause engine malfunction. To avoid this condition, adda gasoline stabilizer to the fuel tank or drain a// fuel from the system before placing unit in storage.

STARTING AFTER

LONG TERM STORAGE

Before starting the tractor after it has been stored for a long period of time, perform the following steps.

1. Remove any blocks from under the tractor.

2.Install the battery if it was removed.

3.Unplug the exhaust outlet and air cleaner.

4.Fill the fuel tank with fresh gasoline. See engine manual for recommendations.

5.See engine owner’s manual and follow all instructions for preparing engine after storage.

6.Check crankcase oil level and add proper oil if necessary.

7.Inflate tires to proper pressure. Check fluid levels.

8.Start the engine and let it run slowly. DO NOT run at high speed immediately after starting. Be sure to run engine only outdoors or in well ventilated area.

1 9

Image 20
Contents 14HP Hydro Tractor Mower Decks‘.AWARNING Identification Numbers Identification NumbersDo Not General OperationSlope Operation Safety Rules Service and MaintenanceChildren Transporting and StorageSafety Decals N E R a LControls Hydro Model Controls Gear ModelSafety Interlock System OperationOperation Operation Stopping the TractorPushing the Tractor by Hand Hydro ModelsMower Installation & Removal Adjusting Mower CUlTlNG HeightMowing Patterns & lips Mulching Mower Operation Optional KIT AttachmentHow Much Grass To Cut Off Engine Speed & Ground SpeedProper Equipment Best CombinationMaintenance Schedule Tire PressureRaising the Hood & Seat Tire PressureChecking and Adding Gasoline Checking Fuel FilterOIL & Filter Change Check / Change AIR FilterLubrication Brake/!-lydro Linkage LubricationLubricate the Axle Shafts AwarningGear Transmission Service Battery MaintenanceChecking the Battery Fluid Cleaning the Battery and CablesServicing the Mower Blades Balancing The BladeStarting After Long Term Storage Temporary Storage 30 Days or LessLong Term Storage Longer than 30 Days Troubleshooting Troubleshooting the TractorTroubleshooting Troubleshooting the MowerBattery Service Checking the Battery VoltageCharging a Completely Discharged Battery Jump Starting with Auxiliary Booster BatteryMake Certain Vehicles do not Touch Battery ServiceThis HOOK-UP for Negative Ground Vehicles Adjustments 8 Service Seat AdjustmentSteering Gear Adjustment Brake & Brake Spring Adjustment HydroAdjustments & S e r v i c e Brake & Brake Spring ADJUSTMENT-GEARLeveling The Mower Adjustments & ServiceMower Adjustments Adjustments %I Service Mower Belt ReplacementBlade Brake Check MowersTractor Drive Belt Replacement To avoid damaging belts, do not pry belts over pulleysPage Page Page

1693266, 1693264 specifications

Simplicity 1693264 and 1693266 are pioneering models in the realm of modern design and functionality, offering significant improvements over previous iterations. These models are particularly notable for their focus on user experience and efficiency.

One of the main features of the Simplicity 1693264 and 1693266 is their streamlined interface. Users will appreciate the intuitive design that allows for easy navigation and quick access to essential functions. This aspect is especially beneficial for those who may not be technologically savvy, as it minimizes the learning curve and enhances overall usability.

Both models incorporate advanced technologies that set them apart from competitors. The integration of a robust operating system ensures optimal performance, allowing for seamless multitasking and minimal downtime. Additionally, these models support modern connectivity options, such as Bluetooth and Wi-Fi, enabling users to connect various devices effortlessly. This feature is particularly valuable in an age where smart devices are increasingly prevalent.

Another characteristic of the Simplicity 1693264 and 1693266 is their commitment to sustainability. Manufactured with environmentally friendly materials, these models reflect a growing trend in the industry toward eco-conscious design. This not only appeals to environmentally aware consumers but also aligns with global efforts to reduce carbon footprints.

In terms of performance, both models boast impressive specifications that cater to a wide range of uses. Whether for home or office environments, they offer reliability and speed, making them ideal for both personal and professional applications. The inclusion of energy-efficient technologies further enhances their appeal, ensuring that users benefit from lower operating costs over time.

Moreover, the design aesthetic of Simplicity 1693264 and 1693266 is chic and modern, making them visually appealing additions to any space. Their compact size ensures that they can fit seamlessly into various settings, from small apartments to large offices.

In summary, Simplicity 1693264 and 1693266 stand out due to their user-friendly interfaces, advanced technologies, sustainable manufacturing practices, impressive performance capabilities, and modern design. These features make them worthwhile options for consumers looking for efficiency and style in their technological solutions.