Simplicity 14E manual Inspect Hopper Guards, INSPECT/ROTATE Shredding Hammers

Page 27

INSPECT HOPPER GUARDS

The hopper guards are made of a tough, flexible material that permits easy loading of the hopper, while preventing shredded pieces from being ejected out toward the oper- ator.

The hopper guards must always be intact and properly installed to provide protection from ejected pieces.

If a hopper guard becomes damaged in use, do not oper- ate the chipper/shredder until the hopper guard can be replaced.

Contact your local authorized dealer for replacement parts.

Regular Maintenance

Hopper Guards

Figure 23. Hopper Guard Location

INSPECT/ROTATE SHREDDING HAMMERS

The shredding hammers of this chipper/shredder can be rotated to provide new cutting surfaces as required.

If the shredding action of the unit seems sluggish, or you notice that shredded material is not shredded as thor- oughly as when the unit was new, the shredding ham- mers may need to be rotated or replaced.

Consult the Troubleshooting and Repair Section of this manual for complete disassembly, inspection, and replacement instructions.

Your local authorized dealer can provide this service to you if you do not wish to disassemble the unit and inspect/repair it yourself.

INSPECT/SHARPEN CHIPPING KNIVES

Normal chipping operations will gradually wear the cut- ting edges of these blades, but they can be quickly and easily resharpened.

Consult the Troubleshooting and Repair Section of this manual for complete disassembly, inspection, and replacement instructions. However, the blades can be easily inspected by removing the chipper cone.

Your local authorized dealer can provide this service to you if you do not wish to disassemble the unit and inspect/repair it yourself.

Figure 24. J Hammer (Top) and Triangular Hammer Wear Areas

Figure 25. Removing the Chipper Cone to Inspect the Chipper Blades

23

Page 26 Page 28
Image 27
Page 26 Page 28
Contents OPERATOR’S Manual Form Nos OPERATOR’S Manual TP 100-2056-00-CS-B Table of Contents General Setting UPOperating Location Safety Rules & InformationSafe Wearing Apparel Operating SafetyTransporting and Storage Service and MaintenanceRotating Cutters Safety DecalsBecoming Familiar With The Chipper/Shredder Attaching the Handle Tools RequiredHardware Description Attaching the Chipper ConeAttaching Hopper to the Rotor Attaching the HopperCheck & Fill Engine Oil Attaching the Discharge BagChecks Before Starting Controls OperationCold Starts Engine ControlsSTART-UP Shutting DownDischarge Bag ChipperShredder Rotor Vacuum BladesDON’Ts Proper Technique for ChippingTips for Better Chipping DO’sProperly Technique For Feeding Longer Materials Leaves and Lightweight Organic MatterUsing the Optional Vacuum Kit Proper Techniques For ShreddingTips for Better Shredding Waste Materials Guide Regular Maintenance Check for Lose Parts and Hardware OIL LevelChanging OIL Changing the Spark Plug Clean Engine Fins & AIR Intake AreaOil Foam Element AIR Filter REPLACEMENT/SERVICEInspect Battery Electrical Connections Inspect Starter Rope & HandleLube Starter Drive Gear Lubricate Wheel AxlesInspect Chipper Cone Shredder Hopper Inspect Hopper Guards INSPECT/ROTATE Shredding HammersINSPECT/SHARPEN Chipping Knives Check Safety Labels Temporary Storage 30 Days Or LessLong Term Storage Longer Than 30 Days Troubleshooting & Repair Shredding Hammers RepairReassembling Shredder J Hammer Removing Chipper Cone to Expose Chipping Knives Chipping KnivesRemoving Chipper Knife Through Front Opening Installing the Chipper Cone Engine Service Deflector ShieldModel 6/14E Vacuum Attachment Options & Accessories

14E specifications

Simplicity 14E is a remarkable addition to the realm of outdoor electric mobility, designed specifically for those seeking a blend of performance, convenience, and eco-friendliness. This innovative electric vehicle caters to various terrains and user needs, making it a versatile choice for both recreational and practical purposes.

At the heart of the Simplicity 14E is its robust electric drivetrain, providing an efficient, quiet, and emission-free ride. The vehicle is powered by a high-capacity lithium-ion battery that ensures long-lasting performance, allowing users to travel considerable distances without the anxiety of running out of power. With a fully charged battery, the Simplicity 14E can cover up to 50 miles, making it ideal for both day trips and longer excursions.

One of the standout features of the Simplicity 14E is its advanced regenerative braking system. This technology captures energy typically lost during braking and channels it back into the battery, enhancing overall energy efficiency. This not only extends the vehicle's range but also contributes to lower operational costs over time.

The design of the Simplicity 14E places a strong emphasis on user comfort and safety. With an adjustable suspension system, the vehicle can adapt to varying terrain conditions, providing a smooth ride whether traversing rocky trails or cruising along paved paths. Additionally, the ergonomic seating ensures that users can enjoy extended journeys without discomfort.

In terms of connectivity, the Simplicity 14E is equipped with a user-friendly digital dashboard that displays essential information such as speed, battery level, and navigation options. Bluetooth capabilities allow for seamless integration with smartphones, enabling hands-free communication and access to various apps.

Safety is a top priority for the Simplicity 14E. The vehicle is outfitted with high-visibility LED lights, reflecting materials, and a sturdy frame that meets rigorous safety standards, ensuring users can enjoy their adventures with peace of mind.

Overall, the Simplicity 14E stands out for its efficient performance, thoughtful design, and cutting-edge technologies. Whether you're looking for a reliable mode of transportation or an adventurous companion for weekend journeys, the Simplicity 14E promises to deliver an exceptional experience, making it a front-runner in the field of electric mobility innovation.
Top Page Image Contents