Flowtron Outdoor Products LE-800B owner manual Assemble Upper and Lower Housing, Assemble Funnel

Page 5

ASSEMBLY CONTINUED

1. Assemble Upper and Lower Housing

Install the three Tinnerman Clips onto the edge of the Lower Housing in areas provided. Place both Upper Housing and Lower Housing upside down and align the slot in the edge of the Upper Housing with the tab on the Lower Housing.

Push the Lower Housing down until it is seated firmly in the Upper Housing. Position the assembly in the upright position and fasten both housings together using the three #10 x 5/8” sheet metal screws as shown in Figure #5.

Tinnerman Clip (three places)

FIGURE 5

3. Assemble Funnel

Assemble funnel with tabs on outside and screw together in two places using 10-32 x 3/8” screws and 10-32 hex nuts. Place screw heads on inside with nuts on outside.

4. Attach Funnel to Upper Housing

Align four (4) holes in Funnel with four holes in Housing and fasten securely using four #10 x 1/2” screws and #10 flat washer as shown in cutaway view in figure 7.

#10 x 1/2" Screw and

#10 Flat Washer

FIGURE 7

FIGURE 6

page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OWNER’S Manual Table of Contents Carton Contents Key # Description Qty Special Features IncludeKnow Your Flowtron LEAF-EATER IntroductionHardware Bag Contents Qty. Description Looks Like AssemblyPreparation Assembling Legs or Mounting BracketsAssemble Funnel Assemble Upper and Lower HousingAttach Funnel to Upper Housing Read ALL Instructions Safety Rules and PrecautionsCircuit Breaker/Reset Button On/Off SwitchElectrical Requirements Grounding InstructionsMoving Your Unit Safe Operating InstructionsLoading Your Machine Mulching Control LeverCleaning Your Unit MaintenanceRemoval/Replacement of Cutting Line Removal/Cleaning Air FilterFlowtron Exploed View of LE-8800B Rts List Flowtron Electric LEAF-EATER #LE-800B Flowtron LB-800B Parts List357 3389 REV
Top Page Image Contents