Transporting Storage | Poulan XT 200, XT 25, WT21 specs

TRANSPORTING AND

STORAGE

SAllow the engine to cool; secure unit before storing or transporting in vehicle.

S Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit so line limiter cannot accidentally cause injury. Unit can be hung by the tube.

SStore the unit out of the reach of children. If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, call 1--800--554--6723.

SPECIAL NOTICE: This unit is not

equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arrestor screen. If you operate in a locale where such regulations exist, you are legally responsible for installing and maintaining the operating condition of these parts. Failure to do so is a violation of the law. If a spark arrestor is required in your area, contact your Authorized Service Dealer for the proper kit.

SPECIAL NOTICE: Exposure to

vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

WARNING: Make sure your unit is properly assembled and all fasteners are secure.

ADJUST THE HANDLE

SLoosen wing nut on handle.

S Rotate handle to upright position and tighten in a comfortable position between

the trigger and the safety label on the tube. Tighten handle securely.

ATTACH THE SHIELD

WARNING: The shield must be properly installed. The shield provides partial protection from the risk of thrown objects to the operator and others and is equipped with a line limiter which cuts excess line. The line limiter (on underside of shield) is sharp and can cut you.

Assemble your shield (Style A or Style B) as shown.

STYLE A

S Insert bracket into slot in shield. Tighten securely.

Slot Bracket

Shield

STYLE B

SAssemble parts as shown; Tighten securely. Shield

NOTE: Remove	Wing Nut
NOTE: Remove
and use washer and
wing nut from this
bolt for assembling	Washer
shield.

This engine is certified to operate on unleaded gasoline. Gasoline must be mixed with a good quality 2--cycle air--cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand oil is recommended. (A 40:1 ratio is obtained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules under

FUEL SAFETY.

HOW TO STOP YOUR UNIT

Push and hold engine stop switch in the STOP or OFF position until the unit has fully stopped.

XT 200, XT 25, WT21 specifications

The Poulan XT 200, XT 25, and WT21 are powerful machines tailored for homeowners and professionals looking for robust performance in outdoor maintenance. Each model boasts its unique features and technologies, making them versatile tools in lawn care and garden upkeep.

The Poulan XT 200 is a gas-powered trimmer known for its reliability and efficiency. Its lightweight design allows for easy maneuverability, making it an excellent choice for those challenging spots in your yard. The XT 200 is equipped with a 25cc two-cycle engine, which delivers substantial power without sacrificing fuel efficiency. Its Easy-Start system ensures that users can start the trimmer with minimal effort. The adjustable cutting width provides flexibility in handling different tasks, whether trimming tight corners or clearing larger areas.

Next, the Poulan XT 25 is another remarkable model that focuses on convenience and user comfort. It features a robust 25cc engine, similar to the XT 200, but comes with additional enhancements that make it a top choice for homeowners. One of its standout features is the dual-line automatic feed system, which releases cutting line as needed, allowing users to focus on the task without constant reloading. The XT 25 also includes an ergonomic handle design, reducing fatigue during extended use. Its lightweight construction makes it easy to handle, while the anti-vibration technology further enhances user comfort, particularly during long trimming sessions.

Lastly, the Poulan WT21 is a versatile and powerful blower designed for efficient cleanup of debris and leaves. It utilizes a 21cc two-cycle engine that delivers robust performance while remaining lightweight and easy to handle. The WT21 also features a variable speed trigger, providing users with complete control over airflow, whether they need a gentle breeze for delicate tasks or a powerful blast for tough debris. The ergonomic grip ensures comfort during extended operation, promoting ease of use for both novice and seasoned users.

In summary, the Poulan XT 200, XT 25, and WT21 stand out in their respective categories with impressive power, user-friendly features, and advanced technologies. Whether faced with trimming, edging, or blowing leaves, these Poulan models provide the durability and efficiency required to tackle any outdoor task effectively.