Poulan TE 500 CXL manual Troubleshooting Table Cause Remedy

Page 6

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

CAUSE

REMEDY

Engine will not

S

ON/OFF switch in OFF

S

Move ON/OFF switch to ON.

start.

 

position.

 

See “Starting.”

 

S

Engine flooded.

S

 

S

Fuel tank empty.

S

Fill tank with correct fuel mixture.

 

S

Spark plug not firing.

S

Install new spark plug.

 

S

Fuel not reaching carburetor.

S

Check for dirty fuel filter; replace.

 

 

 

 

Check for kinked or split fuel line;

 

 

Carburetor requires adjustment.

 

repair or replace.

 

S

S

See “Carburetor Adjustments.”

Engine will not

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

idle properly.

S

Throttle trigger screw too

S

Loosen screw.

 

 

tight.

 

 

Engine will not

S

Air filter dirty.

S

Clean or replace air filter.

accelerate,

S

Spark plug fouled.

S

Clean or replace spark plug; re-gap.

lacks power,

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

or dies under

 

 

 

 

a load.

 

 

 

 

Engine

S

Fuel mixture incorrect.

S

Empty fuel tank and refill with

smokes

 

Air filter dirty.

 

correct fuel mixture.

excessively.

S

S

Clean or replace air filter.

 

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

Line does not

S

Line improperly routed in head.

S

Check line routing.

advance or

S

Line improperly wound on

S

Rewind line tightly and evenly.

breaks while

 

spool.

 

Use only 0.080” (2 mm) dia. line.

cutting.

S

Line size incorrect.

S

Line welds

S

Line size incorrect.

S

Use only 0.080” (2 mm) dia. line.

onto spool.

S

Incorrect spool.

S

Replace with correct spool.

 

S

Line is being crowded against

S

Cut with tip of line fully extended.

 

 

material being cut.

 

 

Line pulls

S

Too little line outside of head.

S

Remove spool and pull 4 inches

back into

 

 

 

(10 cm) of line outside of head.

head.

S

Line size incorrect.

S

Use only 0.080” (2 mm) dia. line.

 

 

 

 

 

ELECTROLUX HOME PRODUCTS NORTH AMERICA, Division of WCI Outdoor Prod- ucts, Inc. warrants to the original purchaser that each new Weed Eater brand gasoline tool or at-

tachment is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective gasoline prod- uct or attachment as follows from the original date of purchase.

2 YEARS - Parts and Labor, when used for household purposes.

90 DAYS - Parts and Labor, when used for commercial, professional, or income producing purposes.

30 DAYS - Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance, or the use of accessories and/or attachments not specifically

recommended by ELECTROLUX HOME PRODUCTS NORTH AMERICA for this tool.

Additionally, this warranty does not cover tune- ups, spark plugs, filters, cutting line, or rotating head parts that will wear and require replace- ment with reasonable use during the warranty period. This warranty does not cover predeliv- ery setup or normal adjustments explained in the operator’s manual.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR OTHER DAMAGES WILL BE ALLOWED, AND THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT THOSE EX- PRESSLY STIPULATED HEREIN.

SOME STATES DO NOT ALLOW LIMITA- TIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, SO THE ABOVE

6

Image 6
Contents TE 500 CXL Operator Safety Unit / Maintenance SafetyFuel Safety Attaching the Handle Cutting SafetyTransporting and Storage Attaching the ShieldStarting a Warm Engine HOW to Stop Your UnitHOW to Start Your Unit Operating PositionRefilling the Spool with Line Installing Spool with LineCarburetor Adjustments Ignition TimingTroubleshooting Table Cause Remedy Limitations or Exclusion MAY not Apply to YOU

TE 500 CXL specifications

The Poulan TE 500 CXL is a powerful and efficient chainsaw designed for homeowners and professionals alike who require a reliable tool for various cutting tasks. This robust chainsaw features a potent 50cc engine that delivers steady performance, making it suitable for felling trees, limbing, and bucking logs. Weighing in at just under 12 pounds, it balances the need for power with ease of use, allowing users to handle it comfortably for extended periods.

A standout feature of the TE 500 CXL is its patented Easy Start technology, which simplifies the starting process. This technology reduces the effort required to pull the starter cord, making it accessible for users of all skill levels. Additionally, the chainsaw is equipped with a quick-release air filter and tool-less chain tensioning system, ensuring that maintenance is straightforward and efficient. Keeping the chainsaw in top condition is crucial for optimal performance, and these features facilitate quick adjustments on the go.

The Poulan TE 500 CXL is also designed with safety in mind. It includes a chain brake that automatically engages if the force from the kickback exceeds certain parameters, significantly reducing the risk of injury. The ergonomic handle provides a comfortable grip, minimizing vibration and enhancing control during operation. This ergonomic design helps to reduce operator fatigue, allowing users to complete their tasks without discomfort.

Another notable characteristic of the TE 500 CXL is its high-quality chain and bar. The chainsaw utilizes a durable 18-inch steel bar, ideal for handling substantial cutting tasks while promoting efficiency in woodcutting. Additionally, the low-kickback chain design reduces the chances of kickback, making it a safer tool for operators.

The Poulan TE 500 CXL is a versatile and practical chainsaw suitable for both novice and experienced users. With its combination of power, ease of use, and safety features, it stands out as a reliable choice for tackling a variety of outdoor projects, whether it's trimming branches in the backyard or cutting firewood for the winter. Overall, the TE 500 CXL merges innovation with functionality, offering an exceptional experience in wood cutting and maintenance tasks.