Lexicon Lambda Desktop Recording Studio owner manual Specifications

Specifications

Specifications

Microphone Inputs:	(2) Female XLR Pin 2 Hot
Input Impedance:	600 Ohms balanced
Phantom Power:	+48 Volt
GAIN:	+50 dB
EIN:	−120 dB A-weighted @ 50dB gain (150 Ohm source impedance)
Maximum Input Level:	+18 dBu
Frequency Response:	+0, −0.2 dB 20 Hz - 20 kHz, ref. 1 kHz
THD+N:	<.005%, 20 Hz - 20 kHz
Insert Inputs:	(2) 1/4" TRS
Send Level (tip):	+19 dBu maximum
Maximum Return Level (ring):	+19 dBu maximum
Line Inputs:	(2) 1/4" TRS balanced or unbalanced
Input Impedance:	20 kOhm balanced, 10 kOhm unbalanced
Maximum Input Level:	+22 dBu
Frequency Response:	+0, −0.2 dB 20 Hz - 20 kHz, ref. 1kHz
THD+N:	<.009% A/D, 20 Hz - 20 kHz
Instrument Input:	(1) 1/4" mono jack
Input Impedance:	1 MOhm unbalanced
Maximum Input Level:	+19 dBu
Frequency Response:	+0, −0.25 dB 20 Hz - 20 kHz, ref. 1 kHz
THD+N:	<.0125% A/D
Crosstalk:	<−74dB any input or output to any recording channel, 20 Hz-20 kHz
	<−95dB at 1 kHz typical
Line Outputs:	(2) 1/4" TRS balanced or unbalanced
Level:	+19 dBu maximum (+4 dBu nominal input = −15 dbFS)
Impedance:	110 Ohms
Headphone Output:	(1) 1/8" stereo jack 100 mW per channel at 50 Ohms
MIDI Interface:	5 pin DIN connectors for MIDI in and MIDI out
Sample Rate:	44.1 kHz or 48 kHz (determined by computer application)
Dynamic Range:	A/D (24 Bit) 104 dB typical, A-weighted, 20 Hz - 20 kHz
	D/A (24 Bit) 109 dB typical, A-weighted, 20 Hz - 20 kHz
A/D/A (24 Bit)	103 dB typical, A-weighted, 20 Hz - 20 kHz
Analog Path:	118 dB typical, A-weighted, 20 Hz - 20 kHz
USB Type B Socket:	Version 1.1, Version 1.1 hubs are not supported
Power Requirements:	USB powered
Dimensions:	XXX x XXX x XXX
Weight:	XXX lbs.

Lexicon engineers are constantly working to improve the quality of our products.Specifications are therefore subject to change without notice.

34