Poulan PPB32SST Assembly, Cutting Safety, Transporting and Storage, Attaching the Assist Handle

Page 3

CUTTING SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

SUse only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or hedge trimming.

S Keep firm footing and balance. Do not overreach.

SKeep all parts of your body away from muffler and spinning line. Keep engine below waist

level. A hot muffler can cause serious burns. S Cut from your left to your right. Cutting on right side of the shield will throw debris away

from the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

S Allow engine to cool; secure unit before storing or transporting in vehicle.

S Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Store unit so line limiter blade cannot accidentally cause injury. The unit can be hung by the shaft.

S Store unit out of reach of children.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who oper- ate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

ATTACHING THE ASSIST HANDLE

WARNING: When attaching the assist handle, be sure it remains above the safety label and below the arrow on the shaft.

1.Place unit on a flat surface.

2.Loosen and remove wing nut and bolt from assist handle.

3.Firmly push the assist handle over the shaft.

4.Reinstall bolt in handle. Thread wing nut onto bolt. Tighten securely.

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Slot

Wing Nut

Bracket

Shield

 

 

Gearbox

PIVOT

 

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PPB32SST Fuel Safety Safety RulesOperator Safety Unit / Maintenance SafetyAttaching the Assist Handle AssemblyCutting Safety Transporting and StorageOperation Starting a Flooded Engine HOW to Start Your UnitStarting a Cold Engine Starting a Warm EngineTip of the line Trimmer Line AdvanceCutting Methods Grassy areaService and Adjustments MaintenanceCarburetor Adjustment Replacing the Cutting HeadRemove the screwdriver Other Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyPlacement and Repair of Emission

PPB32SST specifications

The Poulan PPB32SST is a highly regarded addition to the line of outdoor power equipment specifically designed for efficiency and performance in demanding lawn care tasks. This versatile string trimmer delivers a blend of power, comfort, and convenience, making it suitable for both homeowners and landscape professionals alike.

One of the main features of the PPB32SST is its robust 32cc, 2-cycle engine. This powerful engine ensures that users can tackle even the toughest overgrowth with ease, allowing for efficient trimming, edging, and clearing. The engine is designed for reliable performance and provides ample power without compromising on weight, ensuring that the trimmer remains manageable during extended use.

The PPB32SST is equipped with a lightweight design, a feature that is crucial for reducing user fatigue. Weighing in at just around 10 pounds, it is easy to maneuver, allowing users to reach difficult areas without straining. This is complemented by a straight shaft design that offers extended reach, making it particularly effective for trimming areas like fences, flower beds, and underbrush.

Another key characteristic of the Poulan PPB32SST is its dual-line bump head. This innovative feature allows for quick line advancement, enabling users to reload trimming line effortlessly with a simple bump on the ground. The dual-line system enhances cutting efficiency, allowing the user to cover more ground in less time and ensuring that the machine can tackle thick vegetation effectively.

The trimmer’s anti-vibration system is another noteworthy feature. This system reduces user fatigue during prolonged operation, providing a more comfortable trimming experience. The cushioned grip handles are designed to absorb vibrations, allowing users to maintain better control and reducing weariness.

For ease of starting, the Poulan PPB32SST includes a spring-assisted starting system. This technology simplifies the starting process, making it quicker and requiring less effort compared to traditional pull-start mechanisms. This feature is particularly beneficial for users who may struggle with the manual start procedures of other trimmers.

In addition to its performance and user-friendly features, the PPB32SST also showcases Poulan’s commitment to durability. Its construction is designed to withstand the rigors of outdoor use, ensuring longevity and reliability, which enhances the value for both casual and professional users.

In summary, the Poulan PPB32SST stands out in the competitive market of string trimmers with its powerful engine, lightweight design, efficient dual-line bump head, anti-vibration system, and ease of starting. These features combined create an effective tool for managing yard work, making it an excellent choice for anyone looking to maintain their outdoor space efficiently.
Top Page Image Contents