Replacing the Cutting Head, Carburetor Adjustment

6.Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot.

Slot

Spool

7.With your finger between the lines, wrap the lines evenly and firmly around the spool in a clockwise direction.

8.Position the lines in the guide slots.

Guide Slot

Guide

Slot

9.Insert the ends of the lines through exit holes in the sides of the cover.

10.Place the spool in the cover.

Spool

Cover

11.Make sure the lines are not caught be- tween the rim of the spool and the wall of the cover.

12.Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place.

REPLACING THE CUTTING HEAD

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while removing and installing trimmer head.

Screwdriver

3.While holding the screwdriver in position, remove trimmer head by turning clock- wise.

4.Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure.

5.Remove the screwdriver.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head, blade or any optional attachment will be spinning during most of this procedure. Wear your protective equipment and observe all safe- ty precautions. After making adjustments, the trimmer head, blade or any optional attachment must not move/spin at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is released.

S The trimmer head, blade or optional attachment moves/spins at idle.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without trimmer head, blade or optional attachment moving or spinning (idle too fast) or stalling (idle speed too slow).

S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head, blade or optional attachment moves or spins at idle.

WARNING: Recheck the idle speed after each adjustment. The trimmer head, blade or optional attachment must not move or spin at idle speed to avoid serious injury to the operator or others.

PPB32SST specifications

The Poulan PPB32SST is a highly regarded addition to the line of outdoor power equipment specifically designed for efficiency and performance in demanding lawn care tasks. This versatile string trimmer delivers a blend of power, comfort, and convenience, making it suitable for both homeowners and landscape professionals alike.

One of the main features of the PPB32SST is its robust 32cc, 2-cycle engine. This powerful engine ensures that users can tackle even the toughest overgrowth with ease, allowing for efficient trimming, edging, and clearing. The engine is designed for reliable performance and provides ample power without compromising on weight, ensuring that the trimmer remains manageable during extended use.

The PPB32SST is equipped with a lightweight design, a feature that is crucial for reducing user fatigue. Weighing in at just around 10 pounds, it is easy to maneuver, allowing users to reach difficult areas without straining. This is complemented by a straight shaft design that offers extended reach, making it particularly effective for trimming areas like fences, flower beds, and underbrush.

Another key characteristic of the Poulan PPB32SST is its dual-line bump head. This innovative feature allows for quick line advancement, enabling users to reload trimming line effortlessly with a simple bump on the ground. The dual-line system enhances cutting efficiency, allowing the user to cover more ground in less time and ensuring that the machine can tackle thick vegetation effectively.

The trimmer’s anti-vibration system is another noteworthy feature. This system reduces user fatigue during prolonged operation, providing a more comfortable trimming experience. The cushioned grip handles are designed to absorb vibrations, allowing users to maintain better control and reducing weariness.

For ease of starting, the Poulan PPB32SST includes a spring-assisted starting system. This technology simplifies the starting process, making it quicker and requiring less effort compared to traditional pull-start mechanisms. This feature is particularly beneficial for users who may struggle with the manual start procedures of other trimmers.

In addition to its performance and user-friendly features, the PPB32SST also showcases Poulan’s commitment to durability. Its construction is designed to withstand the rigors of outdoor use, ensuring longevity and reliability, which enhances the value for both casual and professional users.

In summary, the Poulan PPB32SST stands out in the competitive market of string trimmers with its powerful engine, lightweight design, efficient dual-line bump head, anti-vibration system, and ease of starting. These features combined create an effective tool for managing yard work, making it an excellent choice for anyone looking to maintain their outdoor space efficiently.