Safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Save these instructions

Work area

•Keep work area clean and well lit. Cluttered and dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

•Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

•Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

•Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

•Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

•When operating a power tool outdoors, use an outdoor extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Personal safety

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result

in serious personal injury.

•Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

•Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

•Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

•Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

•If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce dust-related hazards.

Power tool use and care

•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

MX 460, BHT500 specifications

The Global Machinery Company has made significant strides in the industrial equipment sector with its latest innovations, the BHT500 and MX 460 models. These machines are designed to meet the demands of various industries, including construction, manufacturing, and logistics, blending advanced technology with user-centric features.

The BHT500 is a heavy-duty excavator, engineered for performance and versatility. It boasts a powerful engine that provides excellent fuel efficiency while maximizing output. The hydraulics system is state-of-the-art, delivering faster cycle times and superior lifting capacity. Operators appreciate the BHT500's intuitive control system, which enhances accuracy and reduces operator fatigue. The spacious cabin is equipped with ergonomic seating, advanced climate control, and an advanced display panel that provides real-time data on machine performance and fuel consumption.

On the other hand, the MX 460 is a robust mobile crane designed for flexibility and strength. It incorporates a telescopic boom that extends up to impressive heights, allowing it to handle heavy loads with ease. The MX 460 features a cutting-edge stabilization system, ensuring safety and stability even on uneven terrain. Its compact design facilitates maneuverability in tight spaces, making it ideal for urban construction projects.

Both machines feature the latest in telematics technology, enabling real-time monitoring and diagnostics. This connectivity allows fleet managers to track performance metrics remotely, schedule maintenance proactively, and reduce downtime. The manufacturers have also included advanced safety features such as automatic load sensing and emergency shut-off systems, ensuring the well-being of operators and bystanders alike.

Durability is a hallmark of the BHT500 and MX 460 models, constructed from high-quality materials that can withstand tough working conditions. Whether in extreme temperatures or challenging job sites, these machines are built to last.

In summary, the Global Machinery Company’s BHT500 and MX 460 represent the pinnacle of engineering excellence in heavy machinery. With their remarkable features, innovative technologies, and robust characteristics, they are designed to enhance productivity and performance across a variety of industrial applications.