Global Machinery Company GLT25 Power loss or sudden stopping of the engine, Bad quality cut

Page 12

Remove the spark plug, put a few drops of oil into the cylinder and then pull the recoil starter 2 to 3 times in order to distribute the oil evenly. Replace the spark plug.

Problems

Power loss or sudden stopping of the engine

Check whether the fuel tank is empty.

The mixture does not reach the carburettor. Clean the fuel filter in the fuel tank.

There is water in the mixture. Drain and rinse all the fuel system.

The air filter is dirty. Clean the air filter.

There are carbon deposits in the cylinder exhaust pipe or the muffler. Clean those or change the muffler.

Bad quality cut

Overloaded cutting due to too high grass or too thick for engine power.

Wrapped vegetal material on the cutting tool.

12

Image 12
Contents 25cc Contents Description of symbols Dear CustomerIntroduction Environmental protectionSpecifications Safety instructionsPersonal safety Power tool use and careAdditional safety rules for petrol line trimmers Contents of cartonUnpacking Know your product Assembly Installing the safety guardSpool assembly Joining the handlesReplacement of the cutting line FuelingStarting the line trimmer Stopping the line trimmerRunning in the engine Air filterStorage and maintenance after use Fuel FilterChecking the spark plug ServicingPower loss or sudden stopping of the engine Bad quality cutPage Page Page Save this Manual for future reference