Gardena 48 manual Maintenance, Troubleshooting, Accessories, Cleaning the Hedge Trimmer

6. Maintenance

GB

Cleaning the Hedge Trimmer:

7

6

DANGER ! Risk of physical injury / electric shock! Always unplug the mains plug and slide the

AV protective cover 6 over the cutter blade 7 before carrying out maintenance work.

VDo not clean the hedge trimmer under running water (especially high pressure).

1.Clean the hedge trimmer with a damp cloth.

2.Lubricate the trimmer blade 7 with a low viscosity oil (e.g. GARDENA spray-oil Art. 2366). Avoid contact of the oil with plastic parts and wear gloves.

7. Troubleshooting
7	A	DANGER ! Electric shock!
		V Always unplug the mains plug and slide the
6
		protective cover 6 over the cutter blade 7
		before troubleshooting.
Fault	Possible Cause		Remedy
Hedge trimmer does not start	Extension cable not plugged		v Plug in the extension cable
	in or is damaged.		or if necessary replace it.
	When rotating the cutting unit, it		v When rotating the cutting
	was not engaged at 0° or 90°.		unit, engage it at 0° or 90°.

	When tilting the swivel head, it	v When tilting the swivel head,
	was not engaged between 75°	engage it between 75° and
	and -45°.	-45°.
Hedge is not cleanly cut	Blade blunt or damaged.	v Have blade replaced by
		GARDENA-Service.
Telescopic tube slips despite
	Nut/s loose on clamping lever/s.	v Tighten nut/s on clamping
clamped clamping lever /s		lever/s using a 10 mm
		spanner.
In the event of other faults please contact GARDENA Service.
Repairs should only be	carried out by GARDENA service centres or dealers
Aauthorised by GARDENA.
8. Accessories
GARDENA Maintenance Oil	Extends the life of the blade.	Art. 2366

17