CABLES
IMPORTANT
•Use only 1.00mm2 size cable up to 40 metres length maximum.
Maximum rating :
1.00mm2 size cable, 10 amps 250 volts AC.
•YOUR HEDGETRIMMER IS SUPPLIED WITH CABLE WIRED DIRECTLY INTO THE PRODUCT.
1.Mains Cables and Extension Cables are avail- able from your local Approved Service Centre.
2.Do not wire an extension cable directly to your product yourself. Please contact your local Approved Service Centre for further informa- tion on the connectors and kits available.
3.Only use extension cables specifically
designed for outdoor use.
CONNECTORS
IMPORTANT
•Connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed prod- ucts.
•All connectors and cables are of splashproof construction. They are not waterproof and must not be left outside permanently nor should they be submerged or immersed in water. Do not let cable lay or trail through pools of water or splashed with water from
hose pipes.
MAINS PLUG REPLACEMENT
IMPORTANT
•If the plug supplied is cut off it should be destroyed. There is an electric shock haz- ard if a cut off plug is inserted into a 13 amp socket.
1.No earth required. Our products are double insulated to EN50144 and under no circum- stances should an earth be connected to any part of the product.
2.Ensure the mains voltage suits your product
3.IMPORTANT!
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
The wire which is coloured BLUE must be connected to the Terminal which is marked with the letter 'N' or coloured BLACK.
The wire which is coloured BROWN must be connected to the Terminal which is marked with the letter 'L' or coloured RED.
4.It is important that the outer sheath is clamped correctly into the
5.If in doubt consult your local Service Repairer or qualified electrician before the machine is used.
6.A 13 Amp fuse must be fitted to the Mains Plug.
7.The normal plug fuse and household fuse only protect the electrical equipment and are not a safeguard against electrocution.
If your product is hard wired i.e. non- detachable mains electric cable, a conver- sion kit and extension cable is available from all Approved Service Centres which can be found in your local Yellow Pages.
Assembly
A
Assembly of Handguard.
1.Insert Handguard into slot as illustrated in figure A, ensuring that it is securely locat- ed.
DO NOT USE THE PRODUCT WITH- OUT FITTING THE HANDGUARD