Double Auto Feed System, Before USE | Flymo Edger And Trimmer

Double Auto Feed System

How the automatic line feed works (F)

1.When initially switching on the trimmer, a small length of line is fed out.

2.A ‘clattering’ noise will be heard when the two nylon

lines hit the line cutter. DO NOT BE ALARMED this is quite normal. After approximately 5 seconds the

line will be cut to the correct length and the noise will

reduce as the motor reaches full speed.

•Make sure the motor is up to full speed before trimming or edging.

3.If the noise of the nylon line being cut cannot be heard, more line will need to be fed out.

4.To feed more line, it is first necessary to to allow the motor to stop completely, then re-start, allowing the motor to reach full speed.

5.Repeat step 4. until you hear the lines hitting against the cutter. (Do not repeat this procedure more than 6 times)

6.If problems are experienced with the automatic line

feed refer to Fault Finding Chart.

line cutter

How to trim and edge

•WARNING

•The use of eye protection is recommended.

Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line.

Do not allow cutting head to rest on the ground. Do not overload your trimmer. Overloading can be avoided by making sure the motor speed does not drop unduly.

Disconnect from the mains electricity supply before attempting any maintenance or adjust- ment.

•BEFORE USE

Make sure that both lines are fed out.

•Make sure motor is up to full speed before trim- ming or edging.

How to trim

• The switchbox is provided with a lock-off button (G1) to prevent accidental starting.


1.	Hold as illustrated in		Fig H.
2.	To start, press the lock-off button down			(G1), whilst press-
	ing the lock-off button squeeze the switch lever			(G2).
3.	When the trimmer starts release the lock-off button			(G1).	K
4.	Cut with nylon line at an angle using the tip			See Fig H.
5. Swing trimmer in and out			of the cutting area taking
	small cuts.	See Fig J.

6.Line is fed out automatically every time the trimmer head stops rotating and returns to operating speed.

•Extra line can be fed out manually as described on page 6.

7. To stop your trimmer release the switch lever

(G2)

How to edge
1.	Hold as illustrated in	Fig L.
2.	To start, press the lock-off button down		(K1), whilst press-
	ing the lock-off button squeeze the switch lever		(K2)
3.	When the trimmer starts release the lock-off button		(K1).
4. Rest edger on roller for extra stability and line up with the
	edge of the lawn,	see fig M. Edge in direction indicated
	in fig L so that debris is thrown away from you.
5. To stop your trimmer release the switch lever			(K2).
6. To return to trimming mode, turn trimmer over.

•Ensure the electric cable is not snagged or pulled around sharp objects.

Edger And Trimmer specifications

The Flymo Edger and Trimmer is an essential gardening tool designed to help homeowners achieve a neat and tidy garden effortlessly. This versatile device combines the functions of edging and trimming, making it easier for users to maintain a well-groomed lawn and sharp garden borders. With its user-friendly design, the Flymo Edger and Trimmer is perfect for both casual gardeners and enthusiasts alike.

One of the standout features of the Flymo Edger and Trimmer is its lightweight design. Weighing significantly less than many traditional trimmers, it ensures that even less experienced users can maneuver it with ease. This lightweight construction does not compromise its robustness, as it is made with durable materials that are built to withstand the rigors of regular gardening tasks.

The Flymo Edger and Trimmer employs advanced technologies that enhance its performance. The powerful electric motor provides sufficient torque, enabling it to cut through grass and weeds effortlessly. Its sharp, durable blades ensure precise cuts, allowing users to achieve perfectly straight edges along flower beds, pathways, and driveways. The cutting width is adjustable, giving users the flexibility to select the best setting for their specific trimming needs.

Additionally, this tool often features an innovative dual-function system, allowing quick transitions between edging and trimming. Users can easily switch from vertical edging to horizontal trimming with minimal effort, making it an incredibly versatile addition to any gardening toolkit.

Another notable characteristic is the ergonomic handle, designed to provide maximum comfort during prolonged use. The handle's adjustable height ensures that users of all sizes can operate the trimmer comfortably, minimizing the risk of strain or fatigue. This ergonomic design, coupled with the lightweight nature of the tool, enables gardeners to work for extended periods without discomfort.

For added convenience, many models come with a spool and line system that simplifies the process of replacing trimming lines. This easy-adjust system minimizes downtime during gardening projects, allowing users to focus on the task at hand.

In summary, the Flymo Edger and Trimmer is a reliable, efficient, and user-friendly gardening tool that combines performance and convenience. With its lightweight design, powerful motor, dual-function capability, and ergonomic features, it provides a superior gardening experience for anyone looking to maintain a pristine outdoor space. Whether edging along flower beds or trimming overgrown grass, the Flymo Edger and Trimmer stands out as an invaluable tool in any garden maintenance arsenal.