Spool cap and nylon line cont’

To replace nylon line.

For your convenience it is recommended you buy spool and line complete. Nylon line only is also available. Both are available from Electrolux Outdoor Products stockists.

•If you have spool and line complete, follow steps 5 to 11.

•If you have nylon line only, follow the full procedure below.

•IMPORTANT

Always wind the line onto the upper section of the spool first.

•Remember! Your Flymo Trimmer is designed to use only nylon line with a maximum diameter of 1.5mm. Use only genuine Flymo nylon line.

1.Take approximately 5 metres of line. Insert 15mm of line into one of the holes in the upper section of the spool (Q) and wind line in the direction of the arrows on the top of the spool.

2.Leave approximately 100mm of line unwound and

place into cleat as illustrated in figure

3.Repeat on lower section of spool.

4.Care should be taken to ensure that the line is neatly coiled on the spool. Failure to do so will impair the efficiency of the automatic line feed.

5.Remove the cap.

6.Remove the old spool.

7.Place spool into spoolholder.

8.Release one line from cleat.

9. Secure line into slot	(P).
10.Repeat for second line.

•Ensure spool is fully located by gently rotating it dur- ing fitment, whilst keeping the spoolholder steady.

11. Refit the cap.

upper section

	lower section
R	SECURING LINE INTO CLEATS
	SECURING LINE INTO CLEATS

Maintenance

•WARNING

Disconnect from the mains electricity supply, before attempting any maintenance or adjustment.

Cutting head continues to rotate after the trimmer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard.

Caring for your Multi-Trim Revolution

After you have finished using your Flymo Multi-Trim

Revolution follow the procedure below:

1.Disconnect from the mains electricity supply.

2.Never clean your trimmer with water, cleaning fluids, or solvents, just remove debris with a suitable tool, a soft brush or dry cloth.

4. Using a soft brush, clean around the inside of the

safety guard, the cutting head		(Fig S) and the motor
housing air vents.	(Fig T)

5.Inspect the trimmer carefully, especially the parts of the cutting head.

6.If your trimmer is damaged in any way contact your local

Electrolux Outdoor Products approved service centre.

•Never use a damaged trimmer.

7. Wind cable carefully to avoid kinking.

8. Store in a cool, dry place and out of reach of children.

Environmental Information

Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the prod- ucts’ life.

•Packaging is recyclable and plastic components have been labelled (where practical) for cate- gorised recycling.

•Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

•If necessary, contact your local authority for disposal information.

Edger And Trimmer specifications

The Flymo Edger and Trimmer is an essential gardening tool designed to help homeowners achieve a neat and tidy garden effortlessly. This versatile device combines the functions of edging and trimming, making it easier for users to maintain a well-groomed lawn and sharp garden borders. With its user-friendly design, the Flymo Edger and Trimmer is perfect for both casual gardeners and enthusiasts alike.

One of the standout features of the Flymo Edger and Trimmer is its lightweight design. Weighing significantly less than many traditional trimmers, it ensures that even less experienced users can maneuver it with ease. This lightweight construction does not compromise its robustness, as it is made with durable materials that are built to withstand the rigors of regular gardening tasks.

The Flymo Edger and Trimmer employs advanced technologies that enhance its performance. The powerful electric motor provides sufficient torque, enabling it to cut through grass and weeds effortlessly. Its sharp, durable blades ensure precise cuts, allowing users to achieve perfectly straight edges along flower beds, pathways, and driveways. The cutting width is adjustable, giving users the flexibility to select the best setting for their specific trimming needs.

Additionally, this tool often features an innovative dual-function system, allowing quick transitions between edging and trimming. Users can easily switch from vertical edging to horizontal trimming with minimal effort, making it an incredibly versatile addition to any gardening toolkit.

Another notable characteristic is the ergonomic handle, designed to provide maximum comfort during prolonged use. The handle's adjustable height ensures that users of all sizes can operate the trimmer comfortably, minimizing the risk of strain or fatigue. This ergonomic design, coupled with the lightweight nature of the tool, enables gardeners to work for extended periods without discomfort.

For added convenience, many models come with a spool and line system that simplifies the process of replacing trimming lines. This easy-adjust system minimizes downtime during gardening projects, allowing users to focus on the task at hand.

In summary, the Flymo Edger and Trimmer is a reliable, efficient, and user-friendly gardening tool that combines performance and convenience. With its lightweight design, powerful motor, dual-function capability, and ergonomic features, it provides a superior gardening experience for anyone looking to maintain a pristine outdoor space. Whether edging along flower beds or trimming overgrown grass, the Flymo Edger and Trimmer stands out as an invaluable tool in any garden maintenance arsenal.