Poulan 530088129 Carton Contents, Tools Required, Adjust and Secure the HAN- Dlebar

Page 4

Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure

to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

CARTON CONTENTS

Check carton contents against the following list:

SBrushcutter

SBlade shield screws (4) S Cupped washer

S Large nut for installing blades S Hex wrench

S Metal shield S Plastic shield

S Shoulder strap with warning S 4--point weed blade

S Trimmer head (assembled on unit) S Handlebar (assembled on unit)

S Wing nut (screwed onto shield) S Container of oil

WARNING: Always stop unit and dis- connect spark plug before performing any as- sembly procedures.

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

TOOLS REQUIRED

SHex wrench (provided) S Adjustable wrench

ADJUST AND SECURE THE HAN- DLEBAR

DANGER: To avoid serious injury, the barrier portion of the handlebar must be ad- justed and remain installed as shown to pro- vide a barrier between operator and the spin- ning blade. The handlebar clamp must be positioned between the arrows on the handle- bar decal.

1. Lift handlebar to upright position.

Handlebar

2.Rotate handlebar/clamp counterclock- wise toward engine until clamp falls into groove of base.

Handlebar

Handlebar

Clamp

Clamp

Knob

Clamp

Base

3.Place the handlebar in a comfortable position.

4.Retighten handlebar by turning clamp knob clockwise until handlebar is secure and stationary in clamp base (clamp knob can not be overtightened).

ASSEMBLY OF SHOULDER STRAP

WARNING: Proper shoulder strap and handlebar adjustments are required before starting the engine.

1. Try on shoulder strap and adjust for fit and balance before starting the engine or begin- ning a cutting operation.

2. Insert your right arm and head through the shoulder strap and allow it to rest on

your left shoulder. Make sure the danger sign is on your back and the hook is to the right side of your waist.

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

3.Adjust the strap, allowing the hook to be about 6 inches below the waist.

4.Fasten the strap hook to the clamp located between the trigger handle and the handle- bar clamp base and lift the tool to the oper- ating position.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Hazard ZoneEye ProtectionUNIT/MAINTENANCE Safety Fuel SafetyCutting Safety Transporting and StorageCarton Contents Adjust and Secure the HAN- DlebarAssembly of Shoulder Strap Tools RequiredConfiguring Your Unit Assembly Information Trimmer HeadAssembly Information Weed Blade Attaching the Plastic Shield and Trimmer HeadInstallation of the Metal Blade Attaching the Metal ShieldON/STOP Switch HOW to Stop Your UnitKnow Your Brushcutter Primer BulbHOW to Start Your Unit ON/STOP Switch Throttle TriggerStarting a Warm Engine Starting a Flooded EngineOperating Instructions for USE with Trimmer Head Operating Position Trimmer Line AdvanceCutting Methods Unit if blade thrust occurs Operating Instructions for USE with Weed BladeOperator or others Inspect and Clean Unit and DE- Cals Clean AIR FilterCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsBlade Replacement Carburetor AdjustmentReplacing the Line Seasonal StorageTroubleshooting Table Engine Fuel SystemOther Trouble Cause RemedyElectrolux Home PRODUCTS, INC Agency and POULAN/WEED EATER, Divi

530088129 specifications

The Poulan 530088129 is a high-performance chainsaw designed for both professional and hobbyist use, bringing a blend of efficiency, comfort, and advanced technology to the cutting experience. This model stands out with its powerful engine and features that make it suitable for a variety of tasks, from felling trees to trimming branches and cutting firewood.

One of the most notable main features of the Poulan 530088129 is its robust 2-cycle engine, which provides ample power and torque, enabling users to cut through tough wood effortlessly. Its cutting bar typically measures around 16 to 18 inches, striking a balance between reach and maneuverability. This length is ideal for various cutting applications, ensuring users can tackle both small and medium-sized trees or large branches without difficulty.

The saw is equipped with an automatic oiling system that helps maintain the lubrication of the chain and bar while in operation, minimizing wear and extending the lifespan of these components. This feature allows for uninterrupted cutting, as users don't have to frequently stop to apply oil manually. The chain itself is designed for easy replacement and adjustment, making maintenance straightforward.

In terms of comfort, the Poulan 530088129 incorporates ergonomic handles designed to reduce vibration and prevent hand fatigue during prolonged use. The lightweight construction also contributes to a more user-friendly experience, allowing greater control and ease of maneuvering, which is particularly beneficial when working in complex environments or at awkward angles.

Additionally, the chainsaw boasts a safety features package that includes a chain brake, preventing accidental chain movement during kickback incidents. This is crucial for ensuring user safety, as kickback can be a significant hazard when operating chainsaws.

Furthermore, the Poulan 530088129 features a primer bulb for easy starting, making it accessible for users of all experience levels. With its combination of efficiency, safety, and convenience, this model is a reliable option for anyone looking to invest in a durable and effective chainsaw. Overall, the Poulan 530088129 stands out due to its powerful engine, user-friendly features, and an emphasis on safety, making it an excellent choice for a wide range of cutting tasks.
Top Page Image Contents