Poulan 530088129 HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine

Page 8

ON/STOP Switch

Throttle Trigger

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

Starter Handle

Choke

Lever

Primer Bulb

Muffler

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to FULL CHOKE by aligning lever with position shown on de- cal (see illustration below).

Choke position decal

4.Squeeze the throttle trigger fully and hold through all remaining steps.

5.Pull starter rope handle sharply until en- gine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE by aligning lever with position shown on decal (see illustration below).

Choke position decal

7.Pull starter rope sharply until engine runs, but no more than 6 pulls. If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the engine doesn’t start, repeat procedure 2 additional times.

NOTE: If engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to OFF CHOKE by aligning lever with position shown on decal (see illustration below). Al- low the unit to run for 30 more seconds at OFF CHOKE before releasing the throttle trigger. NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

Choke position decal

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 5 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Hazard ZoneEye ProtectionUNIT/MAINTENANCE Safety Fuel SafetyCutting Safety Transporting and StorageCarton Contents Adjust and Secure the HAN- DlebarAssembly of Shoulder Strap Tools RequiredConfiguring Your Unit Assembly Information Trimmer HeadAssembly Information Weed Blade Attaching the Plastic Shield and Trimmer HeadInstallation of the Metal Blade Attaching the Metal ShieldON/STOP Switch HOW to Stop Your UnitKnow Your Brushcutter Primer BulbHOW to Start Your Unit ON/STOP Switch Throttle TriggerStarting a Warm Engine Starting a Flooded EngineCutting Methods Operating Position Trimmer Line AdvanceOperating Instructions for USE with Trimmer Head Operator or others Operating Instructions for USE with Weed BladeUnit if blade thrust occurs Inspect and Clean Unit and DE- Cals Clean AIR FilterCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsBlade Replacement Carburetor AdjustmentReplacing the Line Seasonal StorageTroubleshooting Table Engine Fuel SystemOther Trouble Cause RemedyElectrolux Home PRODUCTS, INC Agency and POULAN/WEED EATER, Divi

530088129 specifications

The Poulan 530088129 is a high-performance chainsaw designed for both professional and hobbyist use, bringing a blend of efficiency, comfort, and advanced technology to the cutting experience. This model stands out with its powerful engine and features that make it suitable for a variety of tasks, from felling trees to trimming branches and cutting firewood.

One of the most notable main features of the Poulan 530088129 is its robust 2-cycle engine, which provides ample power and torque, enabling users to cut through tough wood effortlessly. Its cutting bar typically measures around 16 to 18 inches, striking a balance between reach and maneuverability. This length is ideal for various cutting applications, ensuring users can tackle both small and medium-sized trees or large branches without difficulty.

The saw is equipped with an automatic oiling system that helps maintain the lubrication of the chain and bar while in operation, minimizing wear and extending the lifespan of these components. This feature allows for uninterrupted cutting, as users don't have to frequently stop to apply oil manually. The chain itself is designed for easy replacement and adjustment, making maintenance straightforward.

In terms of comfort, the Poulan 530088129 incorporates ergonomic handles designed to reduce vibration and prevent hand fatigue during prolonged use. The lightweight construction also contributes to a more user-friendly experience, allowing greater control and ease of maneuvering, which is particularly beneficial when working in complex environments or at awkward angles.

Additionally, the chainsaw boasts a safety features package that includes a chain brake, preventing accidental chain movement during kickback incidents. This is crucial for ensuring user safety, as kickback can be a significant hazard when operating chainsaws.

Furthermore, the Poulan 530088129 features a primer bulb for easy starting, making it accessible for users of all experience levels. With its combination of efficiency, safety, and convenience, this model is a reliable option for anyone looking to invest in a durable and effective chainsaw. Overall, the Poulan 530088129 stands out due to its powerful engine, user-friendly features, and an emphasis on safety, making it an excellent choice for a wide range of cutting tasks.
Top Page Image Contents