Poulan 545137273 Maintenance, Check for Loose Fasteners and Parts, Clean AIR Filter

Page 11

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to

the OFF position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

SAfter each use, inspect complete unit for loose or damaged parts. Clean the unit and

labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts by pressing button to re-

lease air filter cover.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PPB100E UL Classified Product Notice Safety RulesOperator Safety Transporting and Storage Unit / Maintenance SafetyFuel Safety Line Trimmer SafetyAlways use the handlebar when using edg- er attachment Edger SafetyBLOWER/VACUUM Safety Brushcutter SafetyProboscis nose Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetySnow Thrower Safety Attaching Shield AssemblyInstalling Trimmer ATTACH- Ment Adjusting the Assist HandleOperation Starting a Flooded Engine HOW to Start Your UnitInstalling Optional ATTACH- Ments Starting a Cold EngineSecondary Hole Locking/Release Button in Primary Hole Operating PositionTrimmer Line Advance Cutting MethodsCheck for Loose Fasteners and Parts MaintenanceInspect and Clean Unit and Labels Clean AIR FilterReplace Spark Plug Service and AdjustmentsCarburetor Adjustment Muffler and Spark ARREST- ING ScreenOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyPlacement and Repair of Emission

545137273 specifications

The Poulan 545137273 is a versatile and powerful chainsaw designed for both homeowners and professionals alike. With its robust features and cutting-edge technologies, this chainsaw stands out in the competitive field of outdoor power equipment. It is tailored to handle a variety of cutting tasks, from tree trimming to firewood preparation.

One of the main features of the Poulan 545137273 is its efficient engine. Equipped with a 50cc two-stroke engine, it delivers an impressive amount of power that allows for quick and efficient cutting. The engine is designed to provide optimal performance while minimizing fuel consumption, making it an economical choice for those who require frequent use. Additionally, the engine includes advanced air injection technology that helps reduce the amount of dirt and debris that enters the air filter, prolonging the life of the engine and enhancing overall performance.

Another notable characteristic of the Poulan 545137273 is its lightweight design. Weighing in at approximately 12 pounds, this chainsaw is easy to maneuver, which is essential for users who may need to work at height or in tight spaces. The balanced design reduces user fatigue, making it suitable for prolonged use without discomfort.

The chainsaw also boasts a 20-inch bar and chain, allowing for long and efficient cutting strokes. This length is ideal for tackling larger trees and logs, while the low-profile chain ensures easy operation and reduces kickback, enhancing safety. Additionally, the chainsaw features an automatic oiling system that keeps the chain lubricated for smoother cuts and reduced wear.

User comfort and safety are prioritized in the design of the Poulan 545137273. It is equipped with an ergonomic handle that provides a secure grip, and the anti-vibration technology helps minimize fatigue during operation. Safety features include a chain brake that stops the chain quickly in case of kickback and a throttle lock for added control.

In conclusion, the Poulan 545137273 is a powerful and efficient chainsaw, designed with the needs of users in mind. Its combination of a strong engine, lightweight construction, and advanced features make it an excellent choice for anyone looking to tackle cutting tasks with ease and confidence. Whether for garden maintenance or professional logging, this chainsaw is a reliable tool that delivers great performance.
Top Page Image Contents