Assembly, Installing Trimmer ATTACH- Ment

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

INSTALLING TRIMMER ATTACH- MENT

CAUTION: When installing trimmer attach-

ment, place the unit on a flat surface for stabil- ity.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

LOOSEN

Secondary Hole

Locking/Release Button in Primary Hole

For optional attachments, see the AS- SEMBLY section of the applicable attach- ment instruction manual.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you. For proper

Shipping protector

TIGHTEN

Knob

orientation of shield, see KNOW YOUR TRIM- MER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Slot

2.	Remove shipping protector from coupler.
3.	Remove the shaft cap from the trimmer
	attachment (if present).
4.	Position locking/release button of attach-
	ment into guide recess of coupler.
5.	Push the attachment into the coupler until
	the locking/release button snaps into the
	primary hole.

Shield

Bracket

6. Before using the unit, tighten the knob se-

curely by turning clockwise.

Line Limiter Blade

Wing

Nut

Coupler	Primary Hole
		Guide Recess
Upper	Locking/	Lower
Upper	Release	Lower
Shaft	Release	Attachment
	Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment instruction manual. Using the wrong hole could lead to seri- ous injury or damage to the unit.

ADJUSTING THE ASSIST HANDLE

WARNING: When adjusting the assist handle, be sure it remains above the safety label and below the mark or arrow on the shaft.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an up- right position; retighten wing nut.

545137273 specifications

The Poulan 545137273 is a versatile and powerful chainsaw designed for both homeowners and professionals alike. With its robust features and cutting-edge technologies, this chainsaw stands out in the competitive field of outdoor power equipment. It is tailored to handle a variety of cutting tasks, from tree trimming to firewood preparation.

One of the main features of the Poulan 545137273 is its efficient engine. Equipped with a 50cc two-stroke engine, it delivers an impressive amount of power that allows for quick and efficient cutting. The engine is designed to provide optimal performance while minimizing fuel consumption, making it an economical choice for those who require frequent use. Additionally, the engine includes advanced air injection technology that helps reduce the amount of dirt and debris that enters the air filter, prolonging the life of the engine and enhancing overall performance.

Another notable characteristic of the Poulan 545137273 is its lightweight design. Weighing in at approximately 12 pounds, this chainsaw is easy to maneuver, which is essential for users who may need to work at height or in tight spaces. The balanced design reduces user fatigue, making it suitable for prolonged use without discomfort.

The chainsaw also boasts a 20-inch bar and chain, allowing for long and efficient cutting strokes. This length is ideal for tackling larger trees and logs, while the low-profile chain ensures easy operation and reduces kickback, enhancing safety. Additionally, the chainsaw features an automatic oiling system that keeps the chain lubricated for smoother cuts and reduced wear.

User comfort and safety are prioritized in the design of the Poulan 545137273. It is equipped with an ergonomic handle that provides a secure grip, and the anti-vibration technology helps minimize fatigue during operation. Safety features include a chain brake that stops the chain quickly in case of kickback and a throttle lock for added control.

In conclusion, the Poulan 545137273 is a powerful and efficient chainsaw, designed with the needs of users in mind. Its combination of a strong engine, lightweight construction, and advanced features make it an excellent choice for anyone looking to tackle cutting tasks with ease and confidence. Whether for garden maintenance or professional logging, this chainsaw is a reliable tool that delivers great performance.