Poulan 530164267 instruction manual Installing Attachment Hanger, Operating Position, Edging

Page 7

INSTALLING ATTACHMENT HANGER

An attachment hanger is provided for storage when attachment is not in use.

To install hanger on attachment:

1.Remove the shaft cap from the attachment (if present) and discard.

2.Press and hold the locking/release button.

3.Push hanger onto the attachment until the locking/release button snaps into the hole.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Heavy Shoes

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing. S Keep right arm slightly bent with right hand

holding the trigger handle of powerhead. S Keep left arm extended with left hand hold-

ing the handlebar.

S Keep unit below waist level.

S Adjust edger wheel for proper cut depth.

WARNING: Never attempt to adjust the edger wheel when the unit is in operation. Always stop the powerhead, wait until the blade stops turning, and disconnect the spark plug (or disconnect powerhead from power source) before making adjustments.

EDGING

As you become familiar with use of your edger attachment, you will be able to determine your own operating pace. Conditions such as depth of cut and material being cut will regu- late the speed and time required for your edg- ing job.

SAllow the engine to warm up before you begin edging.

SIncrease the engine speed before placing the blade in the cut. For best results, run the en- gine at full throttle while cutting.

S Always work going away from people and solid objects such as walls, large stones, trees, automobiles, etc.

SBe careful when edging near trees or valuable

plants. The high speed metal blade may cut roots and cause damage to the plants.

SIf the blade stalls, immediately move the unit back slightly to allow the blade to restart. If the blade continues to stall, stop the engine, dis- connect the spark plug, and inspect for block- age or damage.

WARNING: Keep the blade area clean. Always release the throttle trigger, move the powerhead ON/OFF switch to the OFF position, disconnect the spark plug (or disconnect powerhead from power source), and make sure the blade has completely stopped turning before cleaning.

SETTING THE EDGING DEPTH

WARNING: Never attempt to adjust the cut depth when the engine is running. Al- ways release the throttle trigger, wait until the blade stops turning, move the powerhead ON/OFF switch to the OFF position, and dis- connect spark plug (or disconnect from pow- er source) before making adjustments.

Depth Adjustment Knob

1.Loosen the depth adjustment knob.

2.Slide the wheel to the desired position.

S Raising the wheel will increase the cut- ting depth.

S Lowering the wheel will decrease the cutting depth.

3.Tighten the depth adjustment knob se- curely.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 10/3/03 EnglishEspañol FrançaisSafety Rules Identification of SymbolsOperator Safety Rized service dealer UNIT/MAINTENANCE SafetyFastened Maintain unit according to recommended pro Cedures Transporting and Storage Edging SafetyHandlebar Assembly AssemblyTools Required Know Your Edger Attachment Blade Depth Adjustment KnobInstalling Attachment OperationEdging Installing Attachment HangerSetting the Edging Depth Operating PositionService and Adjustments MaintenanceLightly oil external metal surfaces Limited WarrantyStorage Seasonal Storage

530164267 specifications

The Poulan 530164267 is a well-regarded chainsaw that appeals to both novice users and experienced professionals alike. Known for its balance of power and ease of use, the Poulan brand has built a strong reputation in outdoor power equipment. This particular model combines the latest technology with robust design features to deliver a dependable and efficient cutting experience.

One of the standout features of the Poulan 530164267 is its powerful engine. It is equipped with a high-performance gas engine, which provides ample power for cutting through various types of wood. The engine is designed to be fuel-efficient, ensuring longer operating times between refueling. This makes it suitable for extended jobs such as storm cleanup, firewood cutting, or trimming larger trees.

The chainsaw also boasts an advanced air filtration system, which helps maintain engine cleanliness and prolongs the life of the tool. This feature minimizes dust and debris intake, providing improved performance and reliability over time. Additionally, a tool-less chain tensioning system adds to user convenience, allowing for quick adjustments without the need for additional tools.

When it comes to safety, the Poulan 530164267 is designed with multiple protective features. It includes a safety chain brake that stops the chain immediately in the event of kickback, helping to prevent accidents. Furthermore, the chainsaw features an ergonomic design, with a comfortable grip that helps reduce user fatigue during prolonged use.

In terms of design, the Poulan 530164267 is built with a lightweight chassis, making it easy to maneuver without sacrificing durability. The vibration-dampening technology further enhances user comfort by reducing the amount of vibration felt during operation.

Maintenance is made easy with the easily accessible air filter and spark plug, allowing for simple servicing. The Poulan 530164267 is also equipped with a generous fuel tank capacity, ensuring you spend more time cutting and less time refueling.

In conclusion, the Poulan 530164267 is a versatile, powerful, and user-friendly chainsaw that is suitable for various cutting tasks. With its advanced features and robust design, it meets the needs of both casual users and those who demand reliable performance in more intensive applications. The combination of safety, efficiency, and ease of use positions it as a top choice in the competitive landscape of outdoor power tools.
Top Page Image Contents