Poulan 530164267 instruction manual Maintenance, Service and Adjustments

Page 8

MAINTENANCE

WARNING: Always stop unit and dis- connect spark plug wire (or disconnect pow- erhead from power source) before performing maintenance.

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SBlade Shield -- Discontinue use of edger if blade shield is damaged.

CHECK FOR LOOSE

FASTENERS AND PARTS

SBlade nut S Fasteners

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

BLADE MAINTENANCE

WARNING: The blade will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug (or disconnect powerhead from power source) before performing work on the blade.

WARNING: Always replace a blade that is bent, warped, cracked, broken, or damaged in any other way. Never attempt to straighten and reuse a damaged blade. Use only specified replacement blade. Wear pro- tective gloves when handling or performing maintenance on the blade to help avoid injury.

SThe blade is reversible. When the cutting edge on one side becomes worn, turn the blade over (see BLADE REPLACEMENT in the SERVICE AND ADJUSTMENTS section).

SCheck blade for flatness periodically. Lay the blade on a flat surface to inspect for flat- ness. Throw away a blade that is not flat.

SERVICE AND ADJUSTMENTS

BLADE REPLACEMENT

WARNING: The blade will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug (or disconnect powerhead from power source) before performing work on the blade.

WARNING: Wear protective gloves when handling or performing maintenance on the blade to avoid injury. The blade is sharp and can cut you even when it is not moving.

1.To remove the blade, align hole in the dust cup with the hole in the side of the gearbox by rotating the blade.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while loosening the blade nut.

Screwdriver

3.While holding the screwdriver in position, remove blade nut by turning clockwise.

4.Remove both washers, and the blade from the blade shaft.

Blade shield

Blade Washers

Blade

Blade nut

Shaft

5.Install new blade onto blade shaft.

6.Reinstall both washers and blade nut (counterclockwise).

7.Tighten blade nut firmly with a wrench while holding screwdriver in position.

8.Remove the screwdriver.

9.Turn blade by hand. If the blade binds against the shield, or appears to be un- even, the blade is not centered, and you must reinstall.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents English EspañolFrançais 10/3/03Operator Safety Identification of SymbolsSafety Rules Fastened Maintain unit according to recommended pro Cedures UNIT/MAINTENANCE SafetyRized service dealer Edging Safety Transporting and StorageTools Required AssemblyHandlebar Assembly Blade Depth Adjustment Knob Installing AttachmentOperation Know Your Edger AttachmentInstalling Attachment Hanger Setting the Edging DepthOperating Position EdgingMaintenance Service and AdjustmentsLimited Warranty StorageSeasonal Storage Lightly oil external metal surfaces

530164267 specifications

The Poulan 530164267 is a well-regarded chainsaw that appeals to both novice users and experienced professionals alike. Known for its balance of power and ease of use, the Poulan brand has built a strong reputation in outdoor power equipment. This particular model combines the latest technology with robust design features to deliver a dependable and efficient cutting experience.

One of the standout features of the Poulan 530164267 is its powerful engine. It is equipped with a high-performance gas engine, which provides ample power for cutting through various types of wood. The engine is designed to be fuel-efficient, ensuring longer operating times between refueling. This makes it suitable for extended jobs such as storm cleanup, firewood cutting, or trimming larger trees.

The chainsaw also boasts an advanced air filtration system, which helps maintain engine cleanliness and prolongs the life of the tool. This feature minimizes dust and debris intake, providing improved performance and reliability over time. Additionally, a tool-less chain tensioning system adds to user convenience, allowing for quick adjustments without the need for additional tools.

When it comes to safety, the Poulan 530164267 is designed with multiple protective features. It includes a safety chain brake that stops the chain immediately in the event of kickback, helping to prevent accidents. Furthermore, the chainsaw features an ergonomic design, with a comfortable grip that helps reduce user fatigue during prolonged use.

In terms of design, the Poulan 530164267 is built with a lightweight chassis, making it easy to maneuver without sacrificing durability. The vibration-dampening technology further enhances user comfort by reducing the amount of vibration felt during operation.

Maintenance is made easy with the easily accessible air filter and spark plug, allowing for simple servicing. The Poulan 530164267 is also equipped with a generous fuel tank capacity, ensuring you spend more time cutting and less time refueling.

In conclusion, the Poulan 530164267 is a versatile, powerful, and user-friendly chainsaw that is suitable for various cutting tasks. With its advanced features and robust design, it meets the needs of both casual users and those who demand reliable performance in more intensive applications. The combination of safety, efficiency, and ease of use positions it as a top choice in the competitive landscape of outdoor power tools.
Top Page Image Contents