SUse only for jobs explained in this manual (or manuals for optional attachments).
UNIT / MAINTENANCE SAFETY
SDisconnect the spark plug before performing maintenance except carburetor adjustments.
SLook for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working
condition.
SReplace trimmer head parts that are chipped, cracked, broken, or damaged in any other
way before using the unit.
S Maintain unit according to recommended procedures. Keep cutting line at proper length.
S Use only 0.080″ (2 mm) diameter Poulan PRO brand line. Never use wire, rope, string, etc.
SInstall required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely
fastened.
S Make sure unit is assembled correctly as shown in this manual.
SMake carburetor adjustments with lower end
supported to prevent line from contacting any object.
SKeep others away when making carburetor adjustments.
S Use only recommended Poulan PRO accessories and replacement parts.
S Have all maintenance and service not explained in this manual performed by an authorized service dealer.
FUEL SAFETY
SMix and pour fuel outdoors.
SKeep away from sparks or flames. S Use a container approved for fuel.
S Do not smoke or allow smoking near fuel or the unit.
S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from
fueling site before starting engine.
S Stop engine and allow to cool before removing fuel cap.
S Always store gasoline in a container approved for flammable liquids.
TRANSPORTING AND STORAGE
S Allow engine to cool; secure unit before storing or transporting in vehicle.
S Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.
SStore unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches,
furnaces, etc.
S Store unit so line limiter blade cannot accidentally cause injury. The unit can be hung by the shaft.
SStore unit out of reach of children. SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather
has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An
SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.
LINE TRIMMER SAFETY
WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.
S Use only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or hedge trimming.
SCut from your left to your right. Cutting on right side of the shield will throw debris away from the operator.
ADDITIONAL SAFETY RULES
FOR OPTIONAL ATTACHMENTS
WARNING: For each optional at- tachment used, read entire instruction manu- al before use and follow all warnings and in- structions in manual and on attachment.
WARNING: Ensure handlebar is installed when using edger or brushcutter at- tachments. Attach handlebar above arrow on safety label on the upper shaft (engine end of unit). If your edger or brushcutter attachment does not include a handlebar, a handlebar ac- cessory kit (#530071451) is available from your authorized service dealer.
Handlebar
3