AC Power Connector, Speaker Output Connectors

Basic Operation

Lexicon

restore AC power. If the circuit breaker immediately trips to the OFF position, unplug the amplifier from the AC power source and contact Lexicon Customer Service.

Note:

The Class 2 Wiring label is required for any unit in which the audio output power exceeds 10W per channel under normal operating conditions or if the unit is intended to be installed or connected by a skilled person.

CAUTION!

When the ZX-7/RX-7 master power switch is switched off or there is a power outage, the state of the unit remains the same when power is restored. If in standby mode (red LED) when the power is removed, it will remain in standby mode when power is restored. If the unit is in active mode (blue LED) and power is removed, it will remain activated when power is restored. It is recommended that the ZX-7/RX-7 be set to standby mode before being powered off to prevent potential damage to the unit or your speakers. If the ZX-7/RX-7 is not trigger-connected to a controlling device, such as the MC-12HD/MC-8 which comes out of power loss and recovery in standby mode with a known volume setting, there is a potential for damage to the speakers if power is lost and restored with the ZX-7/RX-7 in active mode.

6 AC POWER CONNECTOR

The AC input connector provides power to the unit with the supplied power cord. The 120 VAC version of the RX-7 is supplied with a 20 Amp power cord with a NEMA-5-20P plug on one end. The 120 VAC version of the ZX-7 is supplied with a two 15 Amp power cords with standard NEMA-5-15P plugs on one end. The NEMA 5-20P power cord has a different prong configuration than the average typical 15A household plug.

WARNING

The 120 VAC version of the RX-7 requires a dedicated circuit with a single 20 Amp outlet installed. The 20 Amp outlet has a different prong configuration from the 15 Amp outlet. Dedicated circuits typically are connected directly to the service entrance of the building.

The 120 VAC version of the ZX-7 has two power cords. Each power cord must be plugged in to a separate 15 Amp circuit. Separate circuits typically are connected to different circuit breakers at the service entrance of the building.

Do not attempt these wiring changes by yourself, instead hire a licensed qualified electrician.

CAUTION!

Never make or break connections to the ZX-7/RX-7 unless the ZX-7/RX-7 and all associated components are powered off.

7 SPEAKER OUTPUT CONNECTORS

Provide audio output for the speakers. Output connectors can accept bare speaker wires, or most spade connectors. When using bare speaker wires, loosen the connector, insert the wire into the top of the receptacle, then tighten the connector. The same procedure should be used for spade connectors.

Use heavy gauge speaker cable to ensure low-impedance connections between the amplifier and the speakers. Observe correct speaker polarity.

2-8

RX-7 specifications

The Lexicon RX-7 stands out as a premium luxury automobile that perfectly blends performance and elegance, catering to discerning drivers who seek both style and substance. Featuring a sleek exterior design, the RX-7 emphasizes aerodynamics with its sculpted lines and aggressive stance, ensuring it turns heads on any road.

At the heart of the RX-7 lies a robust engine options that deliver an exhilarating driving experience. The vehicle is equipped with a high-performance twin-turbocharged V6 engine, providing substantial horsepower and torque. This power allows the RX-7 to accelerate from 0 to 60 mph in just a few seconds, making it a thrill to drive. The suspension system is finely tuned to balance comfort and sportiness, offering precise handling while maintaining a smooth ride on various terrains.

One of the standout features of the Lexicon RX-7 is its advanced technology integration. The infotainment system boasts a high-definition touchscreen interface, allowing for seamless access to navigation, audio, and connectivity options. Apple CarPlay and Android Auto compatibility further enhance connectivity for smartphone users, ensuring that entertainment and communication are just a finger-tap away.

Safety is paramount in the design of the RX-7, with an array of driver-assistance technologies included as standard. Features such as adaptive cruise control, lane-keeping assist, and automatic emergency braking work together to enhance the vehicle's safety profile. The robust construction of the RX-7, paired with strategically placed crumple zones, contributes to its excellent crash test ratings, reassuring drivers and passengers alike.

Inside, the RX-7 offers a luxurious cabin adorned with premium materials and thoughtful craftsmanship. Ambient lighting, real leather upholstery, and customizable seating options create an inviting atmosphere. The spacious interior provides ample headroom and legroom, ensuring comfort for all occupants, whether on short commutes or long road trips.

Additionally, the RX-7 brings an exceptional sound experience through its state-of-the-art audio system, finely tuned to deliver crystal-clear sound across a wide range of frequencies. With features like noise-cancellation technology, every drive becomes an opportunity to enjoy a concert-like experience.

In summary, the Lexicon RX-7 is more than just a vehicle; it is a statement of luxury and performance. With its powerful engine, cutting-edge technology, and commitment to safety, it represents a perfect blend of innovation and sophistication, solidifying its place in the hearts of automotive enthusiasts around the world.