Poulan 545186843 instruction manual Cultivator Safety, Hedge Trimmer Safety, Pole Pruner Safety

Page 15

SNever place objects inside the blower tubes, vacuum tubes or blower outlet. Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals,

break glass, or cause other damage.

S Never run unit without the proper equipment attached. When using your unit as a blower, always install blower tubes.

SCheck air intake opening, blower tubes or vacuum tubes frequently, always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free of debris which can accumulate and restrict proper air flow.

SNever place any object in air intake opening as this could restrict proper air flow and cause damage to the unit.

SNever use for spreading chemicals, fertilizers, or other substances which may contain toxic

materials.

STo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.

CULTIVATOR SAFETY

WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the engine and disconnect the spark plug before unclogging tines or making repairs.

WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc.

S Avoid heavy contact with solid objects that might stop the tines. If heavy contact occurs, stop the engine and inspect the unit for damage.

SNever operate the cultivator without the tine cover in place and properly secured.

SKeep the tines and guard clear of debris. S After striking a foreign object, stop the engine, disconnect the spark plug and inspect the cultivator for damage. Repair

before restarting.

S Disconnect attachment from the drive engine before cleaning the tines with a hose and water to remove any build--up. Oil the tines to prevent rust.

S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use.

S Do not run unit at high speed unless cultivating.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE -- Blade moves momentarily after the trigger is released or the engine is turned off. Do not attempt to clear away cut material when the blade is in motion. Make sure engine is stopped, the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts replaced by an authorized service dealer.

S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.

SKeep the cutting blade and air vents clear of debris.

POLE PRUNER SAFETY

WARNING: The reciprocating blade/ rotating chain can cause severe injury. In- spect the unit before use. Do not operate unit with a bent, cracked or dull blade or dull chain. Keep away from the blade/chain.

WARNING: The reciprocating blade/ rotating chain is sharp. Do not touch. To pre- vent serious injury, always stop engine and ensure blade/chain has stopped moving, dis- connect spark plug, and wear gloves when changing or handling the blade or chain.

WARNING: A coasting blade/rotat- ing chain can cause injury while it continues to move after the engine is stopped. Maintain proper control of the unit until the blade/chain has completely stopped moving. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade or chain when it is moving.

15

Image 15
Contents English Español Français Manual de Instrucciones Manuel d’InstructionsIdentification of Safety Symbols Table of ContentsHazard zone for thrown objects Optional Attachments Safety RulesOperator Safety Powerhead model Attachments Type Part. noTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyTools Required AssemblyCarton Contents Installing Brushcutter AttachmentTo Relocate Shoulder Strap Clamp Assembly of Shoulder StrapConfiguring Your Unit Assembly Information Trimmer HeadAssembly Information Weed Blade Attaching the Plastic Shield and Trimmer HeadWeed Blade Attaching the Metal Shield Installation of the Metal BladeOperation Starting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Installing Optional ATTACH- MentsOperating Position Operating Instructions for USE with Trimmer HeadMowing Operating Instructions for USE with Weed BladeTrimming Scalping SweepingRecommended Cutting Position Additional Safety RulesEdger Safety BLOWER/VACUUM SafetyBreak glass, or cause other damage Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetySnow Thrower Safety Or when walking from one cutting location to anotherKnow how to stop quickly Maintenance Replacing the Line Service and AdjustmentsBlade Replacement Carburetor Idle Speed AdjustmentEngine StorageSeasonal Storage Fuel SystemTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyCanada, contact Poulan PRONANCE, Replacement and Repair