Poulan 545186845 Maintenance, Check for Loose Fasteners and Parts, Clean AIR Filter

Page 13

SDuring light duty cutting.

S Near objects around which the line can wrap such as small posts, trees or fence wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and

releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel

tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

SAfter each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter-

gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Loosen knob by turning counterclock-

wise. Remove air filter cover and air filter. NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Table of ContentsIdentification of Safety Symbols Operator Safety Safety RulesOptional Attachments Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Transporting and StorageBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety HandlebarHedge Trimmer Safety Cultivator SafetyPole Pruner Safety High speed causing injury Snow Thrower SafetyCard blades that are bent, warped, cracked or broken HeadInstalling Trimmer ATTACH- Ment AssemblyAdjusting the Assist Handle Attaching ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitInstalling Optional ATTACH- Ments Starting a Flooded EngineTrimmer Line Advance Operating PositionCutting Methods Locking/Release Button in Primary HoleInspect and Clean Unit and Labels MaintenanceClean AIR Filter Check for Loose Fasteners and PartsMuffler and Spark ARREST- ING Screen Service and AdjustmentsReplace Spark Plug Replacing the LineSlot Replacing the Trimmer Head Carburetor Idle Speed AdjustmentSeasonal Storage Fuel SystemEngine Troubleshooting TableOther Trouble Cause RemedyCanada, contact Limited WarrantyPoulan PRO Ligations The U.S. EnvironmentalNANCE, Replacement and Repair

545186845 specifications

The Poulan 545186845 is a robust and versatile chainsaw that caters to both novice and experienced users, making it an excellent choice for homeowners and professionals alike. Known for its reliability and power, this chainsaw is ideal for a variety of cutting tasks, including tree felling, limb pruning, and firewood preparation.

One of the standout features of the Poulan 545186845 is its powerful engine. It is equipped with a 50cc, 2-stroke engine that delivers ample power for demanding cutting applications, allowing users to tackle larger logs and tough wood with ease. The engine is designed to provide an excellent power-to-weight ratio, ensuring that the chainsaw remains manageable even during extended use.

The chainsaw utilizes a specially designed air filtration system that enhances its performance and prolongs engine life. This system minimizes the amount of dust and debris that enters the engine, resulting in less maintenance and longer periods between filter cleaning. This technology not only extends the lifespan of the unit but also ensures consistent performance during operation.

Another key characteristic is its ease of use. The Poulan 545186845 features an automatic oiling system that maintains proper lubrication to the bar and chain, reducing friction and wear during cutting. Additionally, the chainsaw has a tool-less chain tensioning system, allowing users to quickly adjust the chain tension without the need for any additional tools. This combination of features makes it convenient for users to perform maintenance and adjustments in the field.

Safety is paramount in the design of the Poulan 545186845. It comes equipped with a chain brake that automatically engages in the event of kickback, providing an added layer of protection for the operator. The anti-vibration handle also enhances comfort during use, reducing user fatigue and improving control during prolonged tasks.

The Poulan 545186845 is designed for durability and reliability, with a robust construction that withstands the rigors of regular use. Its lightweight design further enhances its usability, allowing users to maneuver the chainsaw easily while ensuring that it does not become overly burdensome during cutting sessions.

In summary, the Poulan 545186845 is a powerful, versatile, and user-friendly chainsaw that incorporates advanced technology and features. With its strong engine, effective air filtration system, automatic oiling, and safety enhancements, it is a reliable tool for anyone looking to tackle outdoor cutting tasks effectively and efficiently. Whether you're a seasoned professional or a weekend warrior, this chainsaw is sure to meet your needs and exceed your expectations.
Top Page Image Contents