Poulan 545177333, PP446ET Installing Attachment Hanger, Installing Optional ATTACH- Ments

Page 14

REMOVING PRUNER ATTACH-

MENT, LINE TRIMMER ATTACH- MENT, OR OTHER OPTIONAL AT- TACHMENTS

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper Shaft

Coupler

Locking/Release

Button in Primary Hole

INSTALLING ATTACHMENT HANGER

Lower Attachment

LOOSEN

An attachment hanger is provided for storage when attachment is not in use.

To install hanger on attachment:

TIGHTEN Knob

2. Press and hold the locking/release button.

Locking/Release Button

Coupler

Upper Shaft

Lower Attachment

 

3.While securely holding the engine and upper shaft, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the shaft cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler

Primary Hole

 

Guide Recess

Upper

Locking/ Attachment

Shaft

Release

 

Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment instruction manual. Using the wrong hole could lead to seri- ous injury or damage to the unit.

1.Remove the shaft cap from the attach- ment (if present) and discard.

2.Press and hold the locking/release button.

3.Push hanger onto the attachment until the locking/release button snaps into the hole.

OPERATING INSTRUCTIONS

It is recommended that the engine not be operated for longer than 1 minute at full throttle.

OPERATING INSTRUCTIONS FOR PRUNER ATTACHMENT OPERATING POSITION

ALWAYS WEAR:

Head

protection Eye protection

Long pants

Heavy shoes

DANGER: Do not extend arms above shoulders while pruning. Do not stand be- neath branch being cut.

WARNING: Always wear head, eye, hearing, foot and body protection to reduce the risk of injury when operating this unit.

When operating unit, clip shoulder strap onto clamp, stand as shown and check for the fol- lowing:

SExtend your left arm and hold assist handle with your left hand.

SHold throttle grip with your right hand with

finger on throttle trigger.

SKeep engine end below waist level.

SKeep shoulder strap pad centered on your left shoulder and danger sign centered on

your back.

S Maintain full weight of tool on your left shoulder.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Hazard zone for thrown objects Identification of Safety Symbols Line Trimmer Safety Safety RulesPruner Safety Plan AheadKickback Maintain Your Unit in Good Working OrderHandle Fuel with Caution Reduce the Chance KickbackFor Optional Attachments Kickback Safety FeaturesMaintain Control TipBrushcutter Safety Edger SafetyBLOWER/VACUUM Safety Skid in contact with the groundSnow Thrower Safety Cultivator SafetyHedge Trimmer Safety Away from the operatorAssembly Tools RequiredTo Relocate Shoulder Strap Clamp Shoulder Strap AssemblyAdjusting the Assist Handle Attaching Shield for Line Trimmer AttachmentOperation BAR and Chain Lubrication HOW to Stop Your UnitHOW to Start Your Unit Starting a Cold EngineLower Attachment Installing Attachment HangerInstalling Optional ATTACH- Ments Locking/Release Button CouplerTrimmer Line Advance Pruning Important PointsPruning Technique Will fallWays are shown below Tip of the Line Cutting MethodsGrassy area Does The Cutting Work AreaMaintenance Service and Adjustments Replacing the Trimmer Head Chain AdjustmentReplacing the Line Fuel System Carburetor Idle Speed AdjustmentSeasonal Storage EngineSee Fueling Engine in Operation Troubleshooting Table Cause RemedyEmpty fuel tank and refill with Ligations The U.S. Environmental Limited WarrantyCanada, contact Repair or Replacement of Parts

PP446ET, 545177333 specifications

The Poulan 545177333 PP446ET is a cutting-edge chainsaw designed for both professional and home applications, offering efficiency and ease of use for a variety of cutting tasks. This model is particularly known for its robust design, powerful engine, and user-friendly features, making it a popular choice among landscapers, contractors, and DIY enthusiasts.

One of the standout features of the PP446ET is its powerful 46cc two-stroke engine. This engine provides ample power for tackling tough jobs, from trimming trees to cutting firewood. The engine is designed with fuel efficiency in mind, ensuring that users can complete their tasks without frequent refueling interruptions. Additionally, the engine is engineered for reduced emissions, aligning with modern environmental standards and making it a more eco-friendly option.

The Poulan PP446ET is equipped with a 18-inch bar, allowing for greater reach and enhanced cutting capacity. This length is ideal for a wide range of tasks, from light pruning to larger limb removal and even felling small trees. The chainsaw features a low-profile chain, which aids in smoother cutting and reduces kickback, making it safer for inexperienced users.

A key technological advancement in the PP446ET is its automatic oiling system. This system ensures consistent lubrication of the chain and bar, reducing wear and increasing the lifespan of the chainsaw. Moreover, the tool-free chain tensioning feature simplifies maintenance, allowing users to easily adjust the chain tension without the need for additional tools.

User comfort is also a priority in the design of the PP446ET. The chainsaw features an ergonomic handle, which provides a secure grip and reduces fatigue during prolonged usage. The anti-vibration technology incorporated into the design further enhances comfort, allowing users to work longer without discomfort.

Safety features are paramount in any chainsaw, and the PP446ET excels in this area. The chainsaw is equipped with a chain brake that stops the chain almost immediately in the event of a kickback, along with a safety throttle lock to prevent accidental starts.

Overall, the Poulan 545177333 PP446ET stands out as a reliable, powerful, and user-friendly chainsaw. Its combination of innovative technologies, user-centric design, and robust performance makes it an excellent choice for anyone looking to tackle their cutting tasks with efficiency and ease.
Top Page Image Contents