Poulan 545137282 Replacing the Cutting Head, Carburetor Adjustment, Remove the screwdriver

Page 8

6.Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot.

Slot

Spool

7.With your finger between the lines, wrap the lines evenly and firmly around the spool in a clockwise direction.

8.Position the lines in the guide slots.

Guide Slot

Guide

Slot

9.Insert the ends of the lines through exit holes in the sides of the cover.

10.Place the spool in the cover.

Spool

Cover

11.Make sure the lines are not caught be- tween the rim of the spool and the wall of the cover.

12.Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place.

REPLACING THE CUTTING HEAD

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while removing and installing trimmer head.

Screwdriver

3.While holding the screwdriver in position, remove trimmer head by turning clock- wise.

4.Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure.

5.Remove the screwdriver.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head, blade or any optional attachment will be spinning during most of this procedure. Wear your protective equipment and observe all safe- ty precautions. After making adjustments, the trimmer head, blade or any optional attachment must not move/spin at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is released.

S The trimmer head, blade or optional attachment moves/spins at idle.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without trimmer head, blade or optional attachment moving or spinning (idle too fast) or stalling (idle speed too slow).

S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head, blade or optional attachment moves or spins at idle.

WARNING: Recheck the idle speed after each adjustment. The trimmer head, blade or optional attachment must not move or spin at idle speed to avoid serious injury to the operator or others.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PPB32SST Safety Rules Operator SafetyUnit / Maintenance Safety Fuel SafetyAssembly Cutting SafetyTransporting and Storage Attaching the Assist HandleOperation HOW to Start Your Unit Starting a Cold EngineStarting a Warm Engine Starting a Flooded EngineTrimmer Line Advance Cutting MethodsGrassy area Tip of the lineMaintenance Service and AdjustmentsRemove the screwdriver Carburetor AdjustmentReplacing the Cutting Head Seasonal Storage Fuel SystemEngine OtherTroubleshooting Table Cause Remedy Limited Warranty Ligations The U.S. EnvironmentalPlacement and Repair of Emission

545137282 specifications

The Poulan 545137282 is a notable chainsaw designed to meet the needs of both amateur woodworkers and seasoned professionals. This powerful tool is crafted to deliver exceptional performance, making it an essential piece of equipment for those who require reliability and efficiency in their cutting tasks.

One of the standout features of the Poulan 545137282 is its robust 50cc engine. This two-cycle engine is engineered to provide ample power for cutting through tough materials like hardwood and softwood alike. Equipped with a 20-inch guide bar, it offers a significant cutting capacity, allowing users to tackle larger logs and branches with ease. The combination of engine size and blade length makes it an ideal choice for both felling trees and trimming branches.

In terms of technology, the Poulan 545137282 incorporates advanced features that enhance usability. The easy start system is particularly noteworthy, as it significantly reduces the effort required to start the chainsaw, making it accessible for users of all skill levels. Additionally, the chainsaw includes an adjustable automatic oiling system, which ensures that the chain is always lubricated without the need for constant manual adjustments. This system not only extends the life of the chain but also improves cutting efficiency.

Safety is also a crucial aspect of the Poulan 545137282. It is equipped with a chain brake, which provides an essential safety feature by stopping the chain in the event of a kickback. Furthermore, the anti-vibration technology incorporated into the design minimizes operator fatigue, allowing longer usage without discomfort.

The lightweight design contributes to its maneuverability, making it easier to handle during prolonged use. The chainsaw also features an ergonomic handle that is designed for comfort and optimal control, ensuring precision cutting with less strain on the hands and arms.

The Poulan 545137282 exemplifies durability through its robust construction. Built with high-quality materials, it is designed to withstand the rigors of frequent use, making it a long-lasting investment for any woodworker or landscaping professional.

In conclusion, the Poulan 545137282 combines power, user-friendly technology, and safety features, making it an exceptional choice for anyone in need of a reliable chainsaw for various cutting tasks. Whether for home use or professional jobs, this chainsaw is crafted to deliver high performance and exceptional results.
Top Page Image Contents