Trimmer Line Advance, Cutting Methods | Poulan 545137282 instruction

TRIMMER LINE ADVANCE

The trimmer line will advance approximately 2 inches (5 cm) each time the bottom of the trimmer head is tapped on the ground with the engine running at full throttle.

The most efficient line length is the maximum length allowed by the line limiter. Always keep the shield in place when the tool is being oper- ated.

To advance line:

SOperate the engine at full throttle.

SHold the trimmer head parallel to and above

the grassy area.

STap the bottom of the trimmer head lightly on the ground one time. Approximately 2 inches (5 cm) of line will be advanced with each tap.

Always tap the trimmer head on a grassy area. Tapping on surfaces such as concrete or as- phalt can cause excessive wear to the trimmer head.If the line is worn down to 2 inches (5 cm) or less, more than one tap will be required to ob- tain the most efficient line length.

WARNING: Use only 0.095″ (2.4

mm)diameter line. Other sizes of line will not advance properly and can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off dur- ing cutting and become a dangerous missile that can cause serious injury.

CUTTING METHODS

WARNING: Use minimum speed and do not crowd the line when cutting around hard objects (rock, gravel, fence posts, etc.), which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard.

SThe tip of the line does the cutting. You will achieve the best performance and mini- mum line wear by not crowding the line into the cutting area. The right and wrong ways are shown below.

Tip of the line	Line crowded into
does the cutting.	work area.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique removes unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique in- creases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

RightWrong

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can wrap such as small posts, trees or fence

wire.

SFor mowing or sweeping, use full throttle for a good clean job.

SWEEPING -- The fanning action of the rotat- ing line can be used to blow away loose debris from an area. Keep the line parallel to and above the area surface and swing the tool from side to side.

Sweeping

545137282 specifications

The Poulan 545137282 is a notable chainsaw designed to meet the needs of both amateur woodworkers and seasoned professionals. This powerful tool is crafted to deliver exceptional performance, making it an essential piece of equipment for those who require reliability and efficiency in their cutting tasks.

One of the standout features of the Poulan 545137282 is its robust 50cc engine. This two-cycle engine is engineered to provide ample power for cutting through tough materials like hardwood and softwood alike. Equipped with a 20-inch guide bar, it offers a significant cutting capacity, allowing users to tackle larger logs and branches with ease. The combination of engine size and blade length makes it an ideal choice for both felling trees and trimming branches.

In terms of technology, the Poulan 545137282 incorporates advanced features that enhance usability. The easy start system is particularly noteworthy, as it significantly reduces the effort required to start the chainsaw, making it accessible for users of all skill levels. Additionally, the chainsaw includes an adjustable automatic oiling system, which ensures that the chain is always lubricated without the need for constant manual adjustments. This system not only extends the life of the chain but also improves cutting efficiency.

Safety is also a crucial aspect of the Poulan 545137282. It is equipped with a chain brake, which provides an essential safety feature by stopping the chain in the event of a kickback. Furthermore, the anti-vibration technology incorporated into the design minimizes operator fatigue, allowing longer usage without discomfort.

The lightweight design contributes to its maneuverability, making it easier to handle during prolonged use. The chainsaw also features an ergonomic handle that is designed for comfort and optimal control, ensuring precision cutting with less strain on the hands and arms.

The Poulan 545137282 exemplifies durability through its robust construction. Built with high-quality materials, it is designed to withstand the rigors of frequent use, making it a long-lasting investment for any woodworker or landscaping professional.

In conclusion, the Poulan 545137282 combines power, user-friendly technology, and safety features, making it an exceptional choice for anyone in need of a reliable chainsaw for various cutting tasks. Whether for home use or professional jobs, this chainsaw is crafted to deliver high performance and exceptional results.