Maintenance, Check for Loose Fasteners and Parts

Tip of the line	Line crowded into
does the cutting.	work area.

RightWrong

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can wrap such as small posts, trees or fence

wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique removes unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees,

posts, monuments, etc. This technique in- creases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used to blow away loose debris from an area. Keep the line parallel to and above the area surface and swing the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to the OFF position. Make sure engine stops;

then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

545137291 specifications

The Poulan 545137291 is a versatile and powerful chainsaw designed for homeowners and professionals alike. Renowned for its reliability and performance, this tool is an essential asset for anyone looking to tackle various cutting tasks, from felling trees to limbing branches and cutting firewood.

One of the standout features of the Poulan 545137291 is its robust engine. Powered by a 50cc, 2-cycle engine, this chainsaw delivers impressive cutting speed and efficiency. The high engine power ensures that users can effectively handle even the toughest jobs with ease. Furthermore, the engine is designed to optimize fuel efficiency, allowing users to get more work done on a single tank of gas while minimizing emissions, adhering to modern environmental standards.

The chainsaw is equipped with a 20-inch bar and chain, providing ample length for cutting through larger logs and trees. The combination of the powerful engine and the extended bar ensures that it can cut through hardwoods and softwoods alike with minimal effort. The chain itself features a low kickback design, enhancing safety during use and allowing for more control while operating.

Another noteworthy feature of the Poulan 545137291 is its user-friendly design. The chainsaw comes equipped with an easy-starting system, often featuring a simplified starting procedure that reduces the manual effort typically required to start a 2-cycle engine. Additionally, it has an ergonomic handle with a comfortable grip, which reduces user fatigue during extended use. This is especially important for users who may be working for long hours.

Maintenance is made manageable with the Poulan 545137291. It features a tool-less chain tensioning system, allowing users to easily adjust the chain tension without the need for any additional tools. This ensures the chain remains in optimal condition for safe and efficient cutting. Moreover, the air filter is easily accessible for routine cleaning and replacement, promoting better engine performance over time.

In summary, the Poulan 545137291 chainsaw is designed with a blend of power, safety, and user convenience. With its 50cc engine, 20-inch bar, low kickback chain, and user-friendly features, it stands out as a reliable choice for both novice and experienced users alike. Whether for regular yard maintenance, storm cleanup, or larger forestry projects, this chainsaw provides the performance and functionality needed to get the job done effectively.