Service and Adjustments

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND DE- CALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts by pressing button to re-

lease air filter cover.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

Button

Air Filter

Air Filter Cover

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by an authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. In- spect spark plug every 25 hours of usage. Clean and/or replace as necessary. Set spark plug gap at 0.025 inch (0.6 mm). Ignition tim- ing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

REPLACING THE LINE

1.Press the tabs on the side of the trimmer head and remove cover and spool.

Cover

Tab

Tap Button

2.Remove any remaining line.

3.Clean dirt and debris from all parts. Re- place spool if it is worn or damaged.

4.Replace with a pre-wound spool, or re- place line using a 15 feet (4.5 meters) length of 0.095 inch (2.4 mm) diameter Poulan PRO brand line.

5.When installing new line on an existing spool, hold the spool as shown in the il- lustration below.

6.Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot.

Slot

Spool

7.With your finger between the lines, wrap the lines evenly and firmly around the spool in a clockwise direction.

8.Position the lines in the guide slots.

545137291 specifications

The Poulan 545137291 is a versatile and powerful chainsaw designed for homeowners and professionals alike. Renowned for its reliability and performance, this tool is an essential asset for anyone looking to tackle various cutting tasks, from felling trees to limbing branches and cutting firewood.

One of the standout features of the Poulan 545137291 is its robust engine. Powered by a 50cc, 2-cycle engine, this chainsaw delivers impressive cutting speed and efficiency. The high engine power ensures that users can effectively handle even the toughest jobs with ease. Furthermore, the engine is designed to optimize fuel efficiency, allowing users to get more work done on a single tank of gas while minimizing emissions, adhering to modern environmental standards.

The chainsaw is equipped with a 20-inch bar and chain, providing ample length for cutting through larger logs and trees. The combination of the powerful engine and the extended bar ensures that it can cut through hardwoods and softwoods alike with minimal effort. The chain itself features a low kickback design, enhancing safety during use and allowing for more control while operating.

Another noteworthy feature of the Poulan 545137291 is its user-friendly design. The chainsaw comes equipped with an easy-starting system, often featuring a simplified starting procedure that reduces the manual effort typically required to start a 2-cycle engine. Additionally, it has an ergonomic handle with a comfortable grip, which reduces user fatigue during extended use. This is especially important for users who may be working for long hours.

Maintenance is made manageable with the Poulan 545137291. It features a tool-less chain tensioning system, allowing users to easily adjust the chain tension without the need for any additional tools. This ensures the chain remains in optimal condition for safe and efficient cutting. Moreover, the air filter is easily accessible for routine cleaning and replacement, promoting better engine performance over time.

In summary, the Poulan 545137291 chainsaw is designed with a blend of power, safety, and user convenience. With its 50cc engine, 20-inch bar, low kickback chain, and user-friendly features, it stands out as a reliable choice for both novice and experienced users alike. Whether for regular yard maintenance, storm cleanup, or larger forestry projects, this chainsaw provides the performance and functionality needed to get the job done effectively.