Poulan 530163735 Hedge Trimmer Safety, Snow Thrower Safety, Head, Essary before restarting unit

Page 7

S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use.

SDo not run unit at high speed unless culti- vating.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE -- Blade moves momentarily after the trigger is re- leased. Do not attempt to clear away cut ma- terial when the blade is in motion. Make sure the switch is in the OFF position, the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

Blades move

 

Allow blades to stop

 

momentarily

 

before removing

after the

 

them from the cut.

trigger is

 

 

released.

 

 

 

 

 

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts re- placed by your authorized service dealer.

S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.

SKeep the cutting blade and air vents clear of debris.

SNOW THROWER SAFETY

WARNING: Keep hands and feet away from the rotor when starting or running the engine. Never attempt to clear the rotor with the engine/motor running. Stop engine and disconnect spark plug before unclogging snow or debris from discharge chute or when adjusting vanes.

WARNING: Never lean over dis- charge chute. Rocks or debris could be thrown into the eyes and face and cause seri- ous injury or blindness.

WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some objects may be hidden by fallen snow -- be alert for the possibility.

SDirect material discharge away from glass enclosures, automobiles, etc.

SDo not run engine at high speed while not removing snow.

SBe attentive when using the snowthrower, and stay alert for holes in the terrain and other hidden hazards.

SMake sure the rotor will spin freely before attaching the snowthrower to the power-

head.

SIf the rotor will not rotate freely due to frozen ice, thaw the unit before thoroughly before

attempting to operate under power.

SKeep the rotor clear of debris.

SDo not throw snow near other people. The

snow thrower could propel small objects at high speed causing injury.

SAfter striking a foreign object, stop the en- gine, disconnect spark plug and inspect the snowthrower for damage and repair if nec-

essary before restarting unit.

SNever operate the snowthrower near glass enclosures, automobiles and trucks.

SNever attempt to use the snowthrower on a roof.

SNever operate the snowthrower near win- dow wells, dropoffs, etc.

SNever discharge snow onto public roads or

near moving traffic.

SClear snow from slopes by going up and down; never across. Use caution when changing directions. Never clear snow from steep slopes.

SLet snowthrower run for a few minutes after clearing snow so moving parts do not

freeze.

SLook behind and use care when backing up. Exercise caution to avoid slipping or fal-

ling, especially when operating in reverse.

SKnow how to stop quickly.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 16/04 PP445Safety Rules Identification of SymbolsPlan Ahead Kickback Operate Your Pruner SafelyMaintain Your Pruner in Good Working Order Handle Fuel with CautionKickback danger zone on the bar tip Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlFor Optional Attachments Line Trimmer SafetyEdger Safety BLOWER/VACUUM SafetyCurs, stop the engine and inspect the unit for damage Brushcutter SafetyCultivator Safety Proper air flowEssary before restarting unit Hedge Trimmer SafetySnow Thrower Safety HeadAssembly Operation Muffler Set unit on a flat surface HOW to Stop Your UnitHOW to Start Your Unit See the Storage section for additional in- formationStarting a Flooded Engine Installing Optional ATTACH- MentsInstalling Attachment Hanger Starting a Warm EngineCheck for Loose Fasteners and Parts MaintenancePruning Important Points Pruning TechniqueCheck Chain Tension Inspect and Clean Unit and LA- BelsClean AIR Filter BAR MaintenanceService and Adjustments Seasonal Storage Chain AdjustmentCarburetor Adjustment Idle Speed AdjustmentCarbon build-up on Troubleshooting Table Cause RemedyLoad Adjustment Compression lowEPA Emission Control Warranty Statement Limited WarrantyLigations The U. S. Environmental Intermediate 125 hours Extended 300 hours

530163735 specifications

The Poulan 530163735 is a versatile and powerful chainsaw designed to meet the demands of both homeowners and professionals. This remarkable tool is ideal for tasks such as cutting firewood, trimming trees, or clearing shrubs and is known for its reliability, performance, and user-friendly features.

One of the standout features of the Poulan 530163735 is its robust engine. This chainsaw is equipped with a powerful two-stroke engine that delivers efficient cutting performance while maintaining a manageable weight. The engine is engineered to provide a balance of power and fuel efficiency, allowing users to work longer without frequent refueling. The chainsaw also utilizes advanced technology that minimizes emissions, making it an environmentally friendly choice for those who value sustainability.

The chainsaw's cutting system features a durable chain and bar setup that can handle various cutting tasks with ease. The high-quality steel bar is designed for durability and longevity, ensuring that it withstands the rigors of regular use. Furthermore, the chainsaw's chain is engineered for precise cutting, allowing users to make clean and efficient cuts through wood of varying thickness.

Ergonomics play a significant role in the design of the Poulan 530163735. It features an anti-vibration system that reduces user fatigue, enabling longer periods of operation without discomfort. The handle is designed for a comfortable grip, providing excellent control during use. Additionally, chain tensioning is simplified, featuring a tool-free adjustment system that allows users to easily adjust the chain tension on the go.

Safety is paramount when using power tools, and this chainsaw incorporates several safety features to protect the user. The chain brake system is one such feature, which automatically stops the chain if the saw kicks back, reducing the risk of accidents. The chainsaw also includes a safety guard over the front handle, further enhancing user protection during operation.

In summary, the Poulan 530163735 chainsaw stands out for its powerful engine, efficient cutting capabilities, user-friendly design, and essential safety features. Whether you are a homeowner looking to maintain your property or a professional needing a reliable tool for various cutting tasks, this chainsaw delivers the performance and comfort necessary for effective wood cutting. With its combination of power, efficiency, and safety, the Poulan 530163735 is a commendable choice in the world of chainsaws.
Top Page Image Contents