Pruning Important Points, Pruning Technique, Foot

DANGER: Do not extend arms above shoulders while pruning. Do not stand be- neath branch being cut.

WARNING: Always wear head, eye, hearing, foot and body protection to reduce the risk of injury when operating this unit.

When operating unit, clip shoulder strap onto clamp, stand as shown and check for the fol- lowing:

SExtend your left arm and hold assist handle

with your left hand.

SHold throttle grip with your right hand with finger on throttle trigger.

SKeep engine end below waist level.

SKeep shoulder strap pad centered on your left shoulder and danger sign centered on

your back.

S Maintain full weight of tool on your left shoulder.

Always release the throttle trigger and allow the engine to return to idle speed when not pruning. To stop engine:

SRelease the throttle trigger.

SMove the ON/OFF switch to the OFF posi- tion.

PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or ob- jects at the nose of the guide bar when prun- ing. Allowing such contact can result in seri- ous injury.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the pruner. Maintain secure footing and balance.

SPlan cut carefully. Check direction branch will fall.

S Watch out for springpoles. Springpoles are small size limbs which can catch the chain and whip toward you or pull you off balance. Use extreme caution when cutting small size limbs or slender material.

SWatch out for branches immediately behind the branch being pruned. If the chain hits the rear branch, damage to the unit may occur.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the pruner when the tension in the wood fibers is released.

SKeep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

S Long branches should be removed in several pieces.

PRUNING TECHNIQUE

When ready to cut, accelerate to full throttle and apply a light cutting pressure. DO NOT use back and forth sawing action.

Second cut

Third cut

Collar

First cut

Pruning technique

1.Make the first cut 6 inches (15 cm) from the tree trunk on the bottom of the limb. Use top of guide bar to make this cut. Cut 1/3 through the diameter of the limb.

NOTE: When making the second and third cuts, rest the foot of the pruner against the tree limb that is being cut to prevent whipping of the branch.

Foot

2.Next, move 2 -- 4 inches (5 -- 10 cm) far- ther out on the limb and make a second cut all the way through the limb.

3.Then, make a final cut leaving a 1 -- 2 inch (2.5 -- 5 cm) collar from the trunk of the tree to avoid damage to the tree.

PP258TP specifications

The Poulan PP258TP is a versatile and powerful pole saw that caters to both homeowners and landscaping professionals alike. Designed for efficient tree trimming and maintenance tasks, this tool combines robust performance with user-friendly features, making it an ideal choice for anyone looking to keep their outdoor spaces well-groomed.

One of the standout features of the PP258TP is its 25cc, 2-cycle engine. This powerful engine delivers strong performance while also being lightweight, allowing users to maneuver the pole saw with ease. The engine is designed to start quickly, reducing frustration and enabling users to focus on their work rather than struggling with difficult starts.

The Poulan PP258TP also comes equipped with a 10-inch Oregon bar and chain, which allows for precise cutting. This saw is suitable for reaching high branches without the need for a ladder, thanks to its adjustable extension pole that can extend up to 8 feet. This added reach is particularly useful for tackling tall trees and hard-to-reach areas, making it a valuable tool for any yard maintenance task.

In terms of technology, the PP258TP showcases Poulan's commitment to user comfort and safety. The tool features an anti-vibration system that helps reduce fatigue during prolonged use, allowing users to work longer while maintaining comfort. Additionally, a safety switch ensures that the tool only operates when intended, providing an extra layer of security, especially when working on elevated branches.

Durability is another key characteristic of the Poulan PP258TP. Built with high-quality materials, this pole saw is designed to withstand the rigors of outdoor use. The bar and chain are engineered for longevity, and regular maintenance protocols ensure continued optimal performance.

Finally, the lightweight design of the PP258TP makes it easy to carry and handle. Weighing just over 10 pounds, it strikes a balance between power and portability, making it a reliable choice for both occasional users and professionals who require efficiency and ease of use.

In conclusion, the Poulan PP258TP pole saw stands out for its combination of power, reach, and user-friendly features. With its robust engine, long extension capability, anti-vibration technology, and durable construction, it is an exceptional tool for effective outdoor maintenance. Whether you're pruning branches or clearing overgrowth, the PP258TP delivers reliable performance, ensuring a well-kept landscape with minimal hassle.