Operation

4.Insert two screws into the screw holes.

5.Secure shoulder strap clamp by tighten- ing screws with a hex wrench.

ADJUSTING THE ASSIST HANDLE

WARNING: When adjusting the as- sist handle, be sure it remains between the

coupler and the lower arrow (closest to coupler) on the safety label to ensure proper

balancing of unit. When adjusting the assist handle or handlebar during use of optional at- tachments, it must be repositioned between

the throttle trigger and the upper arrow (closest to engine) on the safety label.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an up- right position; retighten wing nut.

KNOW YOUR PRUNER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Pruner	Shaft	Assist Handle	Muffler
Pruner		Assist Handle
		Coupler
	Bar oil fill cap	Throttle Trigger
		Throttle Trigger
Chain		Spark Plug
			Primer Bulb
Bar	Bar nut	ON/OFF
	Bar nut	ON/OFF
		Switch
Attachment Hanger
		Starter Handle	Start Lever

ON/OFF SWITCH

The ON/OFF switch is located on the trigger handle and is used to stop the engine. Move the switch to the OFF position to stop the engine.

PRIMER BULB

The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.

START LEVER

The START LEVER helps to supply fuel to the engine to aid in starting. Activate the starting

system by moving the start lever to the START position. DO NOT squeeze the throttle trigger until the engine has started and runs. After the engine starts, allow the engine to warm--up 5 seconds, then fully squeeze the throttle trigger to deactivate the starting system.

COUPLER

The COUPLER enables optional attach- ments to be installed on the unit.

CHAIN TENSION

It is normal for a new chain to stretch during first 15 minutes of operation. You should check your chain tension frequently. See CHAIN TENSION in the SERVICE AND AD- JUSTMENTS section.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is

PP258TP specifications

The Poulan PP258TP is a versatile and powerful pole saw that caters to both homeowners and landscaping professionals alike. Designed for efficient tree trimming and maintenance tasks, this tool combines robust performance with user-friendly features, making it an ideal choice for anyone looking to keep their outdoor spaces well-groomed.

One of the standout features of the PP258TP is its 25cc, 2-cycle engine. This powerful engine delivers strong performance while also being lightweight, allowing users to maneuver the pole saw with ease. The engine is designed to start quickly, reducing frustration and enabling users to focus on their work rather than struggling with difficult starts.

The Poulan PP258TP also comes equipped with a 10-inch Oregon bar and chain, which allows for precise cutting. This saw is suitable for reaching high branches without the need for a ladder, thanks to its adjustable extension pole that can extend up to 8 feet. This added reach is particularly useful for tackling tall trees and hard-to-reach areas, making it a valuable tool for any yard maintenance task.

In terms of technology, the PP258TP showcases Poulan's commitment to user comfort and safety. The tool features an anti-vibration system that helps reduce fatigue during prolonged use, allowing users to work longer while maintaining comfort. Additionally, a safety switch ensures that the tool only operates when intended, providing an extra layer of security, especially when working on elevated branches.

Durability is another key characteristic of the Poulan PP258TP. Built with high-quality materials, this pole saw is designed to withstand the rigors of outdoor use. The bar and chain are engineered for longevity, and regular maintenance protocols ensure continued optimal performance.

Finally, the lightweight design of the PP258TP makes it easy to carry and handle. Weighing just over 10 pounds, it strikes a balance between power and portability, making it a reliable choice for both occasional users and professionals who require efficiency and ease of use.

In conclusion, the Poulan PP258TP pole saw stands out for its combination of power, reach, and user-friendly features. With its robust engine, long extension capability, anti-vibration technology, and durable construction, it is an exceptional tool for effective outdoor maintenance. Whether you're pruning branches or clearing overgrowth, the PP258TP delivers reliable performance, ensuring a well-kept landscape with minimal hassle.