Optional Attachments, Safety Rules, Operator Safety

OPTIONAL ATTACHMENTS

These attachments used in combination with the specified powerhead have been evaluated to ANSI B175.3--2003, “Grass Trimmers and Brushcutters -- Safety Requirements”. These combinations have been evaluated by Underwriter’s Laboratories Inc. (UL) and are conse- quently UL listed:

			Cutting attachment / guard,
Powerhead model Attachments		Type	part. no.
	Trimmer head	WE fixed line	545053902 / 530071919
	Grass blade/grass cutter	4-point blade,	530055892 / 530071383
PP333		8″ (20 cm)
		diameter
	Brushcutter attachment	PP4000C	952711610

These attachments used in combination with the specified powerhead have been evaluated to applicable ISO-- and EN safety requirement standards by the Swedish Machinery Testing Institute.

Attachments	Type	Part. no.

Edger attachment	PP1000E	952711607

Cultivator attachment	PP2000T	952711608

Blower attachment	PP3000B	952711609

Pruner attachment	PP5000P	952711612
Pruner attachment	PP5500P	952711672

SAFETY RULES

WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury.

DANGER: This power tool can be dan- gerous! This unit can cause serious injury in- cluding amputation or blindness to the operator and others. The warnings and safety instruc- tions in this manual must be followed to provide reasonable safety and efficiency in using the unit. The operator is responsible for following the warnings and instructions in this manual and on the unit. Read the entire instruction manual be- fore assembling and using the unit! Restrict the use of this unit to persons who read, under- stand, and follow the warnings and instructions in this manual and on the unit. Never allow chil- dren to operate this unit.

INSTRUCTION	SAFETY INFORMATION
MANUAL	ON THE UNIT

WARNING: Do not use trimmer head as a fastening device for the blade.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact contact an authorized service dealer or call 1--800--554--6723.

OPERATOR SAFETY

S Dress properly. Always wear safety glasses or similar eye protection when op- erating, or performing maintenance on your unit (safety glasses are available). Eye protection should be marked Z87.

SAlways wear face or dust mask if operation is dusty.

SAlways wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards

is recommended.

S Always wear foot protection. Do not go barefoot or wear sandals.

SSecure hair above shoulder length. Secure or remove loose clothing and jewelry or cloth-

ing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts.

SBeing fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line/blade.

SStay Alert. Do not operate unit when you are tired, ill, upset or under influence of alcohol,