Seasonal Storage, Fuel System, Engine, Other

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without trimmer head, blade or optional attachment moving or spinning (idle too fast) or stalling (idle speed too slow).

S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head, blade or optional attachment moves or spins at idle.

WARNING: Recheck the idle speed after each adjustment. The trimmer head, blade or optional attachment must not move or spin at idle speed to avoid serious injury to the operator or others.

Air Filter Cover

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an

authorized			service dealer or call
1--	800--	554--	6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans-

porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy

storage.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container.

Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

PPB250E specifications

The Poulan PPB250E is a versatile and efficient tool designed for both professional landscapers and homeowners who want to maintain their outdoor spaces with ease. This gas-powered blower offers a combination of power, portability, and user-friendly features, making it a standout option in the competitive market of outdoor power equipment.

One of the key features of the Poulan PPB250E is its reliable 25cc engine. This two-cycle engine is designed to deliver strong air output, enabling users to clear leaves, debris, and grass clippings with minimal effort. The blower produces an impressive airflow of up to 450 CFM (cubic feet per minute), making it highly effective for both small and larger yards. The engine is also designed for fuel efficiency, allowing users to work for longer periods without frequent refueling.

Portability is another significant advantage of the Poulan PPB250E. Weighing in at just 8.5 pounds, it is lightweight and easy to maneuver. The comfortable grip handle and well-balanced design reduce fatigue during extended use, making it suitable for homeowners and professionals alike. The blower features a user-friendly throttle control, allowing for precision adjustments based on the user’s needs and the specific job at hand.

Technologically, the Poulan PPB250E incorporates a primer bulb that simplifies starting the engine. This feature minimizes the hassle typically associated with starting gas-powered equipment, ensuring that users can get to work quickly. Additionally, the blower is equipped with a translucent fuel tank, enabling users to easily monitor fuel levels, which enhances operational efficiency.

The PPB250E also boasts a vibration-dampening system, which further enhances user comfort. By minimizing vibrations, it helps reduce operator fatigue, allowing for longer, more productive sessions. Safety features, such as a protective muffler, are designed to ensure that the tool operates quietly while adhering to environmental standards.

In summary, the Poulan PPB250E is a powerful gas blower that combines performance, portability, and ease of use. With its efficient 25cc engine, impressive airflow, lightweight design, and user-friendly features, it is ideal for anyone looking to keep their outdoor spaces tidy and well-maintained. Whether for residential use or professional landscaping, the Poulan PPB250E stands out as a reliable and effective choice.